|
Think you need to contact Grandstream support then.
I've got the same version of * and GXP fw and I get no problems. Sorry I
can't help you any further.
Lee From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of asterisk Sent: 24 May 2006 13:30 To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE: [Asterisk-Users] GXP2k and BLF problem Phone is manually configured through web interface.
Thanks to all those who are helping with this.
Fadge
From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Lee Archer
Are you using preconfiged scripts? If so what happens if you manually config the phone then restart asterisk and then the phone?
Lee
From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of asterisk No, Rebooting the phones does not fix the problem. As previously stated the only way to get them working again is to default the config of the phone and rebuild.
Fadge
From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Lee Archer
I run 1.1.0.13 on my GXP's and after stopping and starting the server I either wait for the phones to re-reg or I reboot the phones. After restarting asterisk does rebooting the phones does fix the problem?
Lee
From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of asterisk Phones are configured for “asterisk BLF” . Like I said, the config works when the phone is defaulted and rebuilt but stops working if the server is rebooted. Show hints Gives:
-= Registered Asterisk Dial Plan Hints =- 310 : SIP/310 State:Unavailable Watchers 0 305 : SIP/305 State:Idle Watchers 0 304 : SIP/304 State:Idle Watchers 0 303 : SIP/303 State:Idle Watchers 0 302 : SIP/302 State:Idle Watchers 0 301 : SIP/301 State:Unavailable Watchers 0 ---------------- - 6 hints registered
Thanks
fadge
From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Lee Archer
Are the GXP's configured properly for BLF and what does show hints print?
Lee
From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of asterisk It does not happen with a reload of asterisk but when the server is rebooted. I have set the register timeout to 1 min but this has no effect. The BLF still does not work. The * is V 1.2.7.1. I can see the phone register first time when phone reboots and would expect to see it re-register every 1 min on the console if I understand things correctly, but it does not.
Fadge
From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Lee Archer
Stopping and restarting Asterisk will lose the hints, then you will have to wait until the phone registers again. With 1.2.7.1 a reload shouldn't lose anything. Change the register time on the phones to something less that 60 minutes if it's a big problem. Instead of factory defaulting the phones you might find a simple restart will re-register the phone and BLF will work on the phone.
Regards
lee
From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of picciuX asterisk version? until 1.2.7.1, sip subscriptions get lost on reload of asterisk. In this case, have to wait until phone re-registers and re-subscribe for BLFs... 2006/5/24, asterisk <[EMAIL PROTECTED]>:
########################################### ########################################### ########################################### This message has been scanned by F-Secure Anti-Virus for Microsoft Exchange. For more information, connect to http://www.f-secure.com/ |
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
