|
The TDM01B is 4 port capable but has only 1 FXO module. I’m
running asterisk 1.2.7 and zaptel 1.2.5. I cannot seem to get the TDM01B
working. When I do the zttool it shows 4/1/0. I can dial out from a POTS phone
up to the point that the cable plugs into the card. Here is my /etc/zaptel.conf loadzone=us fxsks=1 and here is my /etc/Zapata.conf [channels] language=en #include zapata_additional.conf context=from-zaptel signalling=fxs_ks faxdetect=incoming usecallerid=asreceived echocancel=yes callprogress=no busydetect=no echocancelwhenbridged=no echotraining=800 group=0 channel=>1 When I dial in Asterisk does not even show an initiation of
the call. When I dial out on that trunk I get all circuits busy. Ztcfg –vvv
shows the following ztcfg -vvv Zaptel Configuration ====================== Channel map: Channel 01: FXS Kewlstart (Default) (Slaves: 01) 1 channels configured. Any help would be appreciated. Curt |
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
