Is your machine seeing the card? /var/log/messages? Are you loading the
zaptel drivers? modprobe zaptel, modprobe wctdm?
Curt Shaffer wrote:
The TDM01B is 4 port capable but has only 1 FXO module. I’m running
asterisk 1.2.7 and zaptel 1.2.5. I cannot seem to get the TDM01B
working. When I do the zttool it shows 4/1/0. I can dial out from a
POTS phone up to the point that the cable plugs into the card.
Here is my /etc/zaptel.conf
loadzone=us
fxsks=1
and here is my /etc/Zapata.conf
[channels]
language=en
#include zapata_additional.conf
context=from-zaptel
signalling=fxs_ks
faxdetect=incoming
usecallerid=asreceived
echocancel=yes
callprogress=no
busydetect=no
echocancelwhenbridged=no
echotraining=800
group=0
channel=>1
When I dial in Asterisk does not even show an initiation of the call.
When I dial out on that trunk I get all circuits busy. Ztcfg –vvv
shows the following
ztcfg -vvv
Zaptel Configuration
======================
Channel map:
Channel 01: FXS Kewlstart (Default) (Slaves: 01)
1 channels configured.
Any help would be appreciated.
Curt
------------------------------------------------------------------------
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
