> So I took a chance with an X100P knock-off on eBay. I'm running Asterisk + > FreePBX on a PowerMac G3 (beige desktop) using Slackintosh 10.2 and kernel > 2.6.16.16. Everything has been fine up until now. > I compile the 1.2.5 Zaptel drivers without a problem, get the udev > configuration in, modprobe zaptel, and finally modprobe wcfxo. At this > point, I get the message: > > ZT_CHANCONFIG failed on channel 1: No such device or address (6) > FATAL: Error running install command for wcfxo > > dmesg gives me: > > Zapata Telephony Interface Registered on major 196 > Zaptel Version: 1.2.5 Echo Canceller: MG2 > Failed to initailize DAA, giving up... > wcfxo: probe of 0000:00:0e.0 failed with error -5
this is a problem if the card shares interrupt with something on MOtherBOard. configure the slot to other irq, or move the card to other irq. lspci -v will be your friend. Check if someone uses same IRQ as motorola card. -- WoodOO-[P]an[G]alaktikan[A]gent-People <][> http://shadow.pganet.com [EMAIL PROTECTED]@RedHat.users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users