[ I originally sent this to the list last week but it never arrived; it may have been stuck in moderation because the sending address is not my subscribed address. I apologize if you get this twice. ]
I have a Digium TE205P connected to two channel banks in my Asterisk. PBX. I will be installing a Sangoma A101 to be connected to a PSTN PRI in the same box. How should I go about configuring the T1 timing for these spans? Right now my zapata.conf contains span definitions like the following: span=1,0,0,esf,b8zs span=2,0,0,esf,b8zs If I understand the timing comments correctly, using 0 for both spans causes Asterisk to supply the timing for them, which I can't do with a PSTN PRI (right?). Should I anticipate any problems with this kind of configuration? Will I have to configure the Sangoma card in a special way, or reconfigure the Digium card? -- Shaw Terwilliger <[EMAIL PROTECTED]> SourceGear LLC
signature.asc
Description: OpenPGP digital signature
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
