Shaw Terwilliger wrote:
[ I originally sent this to the list last week but it never arrived;
it may have been stuck in moderation because the sending address is
not my subscribed address. I apologize if you get this twice. ]
I have a Digium TE205P connected to two channel banks in my Asterisk.
PBX. I will be installing a Sangoma A101 to be connected to a PSTN PRI
in the same box. How should I go about configuring the T1 timing for
these spans? Right now my zapata.conf contains span definitions like
the following:
span=1,0,0,esf,b8zs
span=2,0,0,esf,b8zs
You need to take your timing from the telco.
Doug
--
Ben Franklin quote:
"Those who would give up Essential Liberty to purchase a little Temporary Safety,
deserve neither Liberty nor Safety."
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
