I am trying to get my Asterisk server to talk to a Panasonic D500 PBX using an E1 connection. The card for the Panasonic uses MFC/R2 and I have installed Unicall. Calls from the Asterisk server to the Panasonic go through without a hitch and I can call any extension I want. The problem is that I cannot get any calls from the Panasonic. I have the following log from a call:
Aug 9 00:27:09 WARNING[14641] chan_unicall.c: Unicall/1 event Detected
Aug 9 00:27:10 WARNING[14641] chan_unicall.c: MFC/R2 UniCall/1 <-
3 on [2/ 2/Seize ack /Seize ack ]
Aug 9 00:27:10 WARNING[14641] chan_unicall.c: MFC/R2 UniCall/1 1 on ->
[2/ 2/Seize ack /Seize ack ]
Aug 9 00:27:10 WARNING[14641] chan_unicall.c: MFC/R2 UniCall/1 <-
3 off [2/ 2/Group A /DNIS request ]
Aug 9 00:27:10 WARNING[14641] chan_unicall.c: MFC/R2 UniCall/1 1 off ->
[2/ 2/Group A /DNIS request ]
Aug 9 00:27:11 WARNING[14641] chan_unicall.c: MFC/R2 UniCall/1 <-
3 on [2/ 2/Group A /DNIS request ]
Aug 9 00:27:11 WARNING[14641] chan_unicall.c: MFC/R2 UniCall/1 1 on ->
[2/ 2/Group A /DNIS request ]
Aug 9 00:27:11 WARNING[14641] chan_unicall.c: MFC/R2 UniCall/1 <-
3 off [2/ 2/Group A /DNIS request ]
Aug 9 00:27:11 WARNING[14641] chan_unicall.c: MFC/R2 UniCall/1 1 off ->
[2/ 2/Group A /DNIS request ]
Aug 9 00:27:11 WARNING[14641] chan_unicall.c: MFC/R2 UniCall/1 <-
3 on [2/ 2/Group A /DNIS request ]
Aug 9 00:27:11 WARNING[14641] chan_unicall.c: MFC/R2 UniCall/1 1 on ->
[2/ 2/Group A /DNIS request ]
Aug 9 00:27:12 WARNING[14641] chan_unicall.c: MFC/R2 UniCall/1 <-
3 off [2/ 2/Group A /DNIS request ]
Aug 9 00:27:12 WARNING[14641] chan_unicall.c: MFC/R2 UniCall/1 1 off ->
[2/ 2/Group A /DNIS request ]
Aug 9 00:27:12 WARNING[14641] chan_unicall.c: MFC/R2 UniCall/1 <-
3 on [2/ 2/Group A /DNIS request ]
Aug 9 00:27:12 WARNING[14641] chan_unicall.c: MFC/R2 UniCall/1 6 on ->
[2/ 2/Group A /DNIS request ]
Aug 9 00:27:12 WARNING[14641] chan_unicall.c: MFC/R2 UniCall/1 <-
3 off [2/ 2/Group C /Category req ]
Aug 9 00:27:12 WARNING[14641] chan_unicall.c: MFC/R2 UniCall/1 6 off ->
[2/ 2/Group C /Category req ]
Aug 9 00:27:13 WARNING[14641] chan_unicall.c: MFC/R2 UniCall/1 <-
6 on [2/ 2/Group C /Category req ]
Aug 9 00:27:13 WARNING[14641] chan_unicall.c: MFC/R2 UniCall/1 1 on ->
[2/ 2/Group C /Category req ]
Aug 9 00:27:13 WARNING[14641] chan_unicall.c: MFC/R2 UniCall/1 <-
6 off [2/ 2/Group C /ANI request ]
Aug 9 00:27:13 WARNING[14641] chan_unicall.c: MFC/R2 UniCall/1 1 off ->
[2/ 2/Group C /ANI request ]
Aug 9 00:27:13 WARNING[14641] chan_unicall.c: MFC/R2 UniCall/1 <-
B on [2/ 2/Group C /ANI request ]
Aug 9 00:27:13 WARNING[14641] chan_unicall.c: MFC/R2 UniCall/1 R2 prot.
err. [2/ 2/Group C /ANI request ] cause 32772 - Unexpected
MF6 signal
Aug 9 00:27:13 WARNING[14641] chan_unicall.c: MFC/R2 UniCall/1 1001 ->
[1/ 1/Idle /Idle ]
Aug 9 00:27:13 WARNING[14641] chan_unicall.c: Unicall/1 event Protocol
failure
According to the Panasonic tech person the problem is that Asterisk
insists on getting the Group C request for a callerid. I tried to
disable callerid in unicall.conf but the result was always the same. I
have mx,10,4 so after I get the first four digits I get the protocol
error. I know many people have integrated with PRI, but the card on the
panasonic does not support that.
--
Carlos Chavez Prats
Director de Tecnología
Telecomunicaciones Abiertas de México S.A. de C.V.
Tel: +52-55-91169161 Ext 2001
signature.asc
Description: This is a digitally signed message part
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
