The sangoma has hardware echo cancel ? If so it makes sence, because the settings in zapata.conf are for the software echo cancel, and that should be disabled for all interfaces that have hardware echo can.
No, that is incorrect. From http://wiki.sangoma.com/wanpipe-asterisk-configure:
"The Wanpipe TDM driver enables HW Echo Cancellation only on channels that have active calls: It waits for zaptel to enable echo cancellation after the call has been established. Therefore, Echo Cancellation option MUST be enabled in /etc/asterisk/zapata.conf."
- Mike _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
