Upon further investigation, I tried the following: lsmod | grep 'wc*'
I can see wctdm (I believe this is the fxs module, no?), wcfxo, zaptel... so I think so far so good. Then: cat /proc/interrupts There I only see the wctdm: 50: 9556184 0 IO-APIC-level uhci_hcd:usb3, wctdm I reckon I should move the card to another slot or somehow disable the USB port? Also, wcfxo does not show up on the list, and I can see on the card that the FXO port (I'm guessing it's that port) is not lit, while the other 3 are. So I'm guessing it didn't get installed or something? The plot thickens... Does anyone have any idea what the problem could be? Thanks! On 9/8/06, Iván Vega R. <[EMAIL PROTECTED]> wrote:
Hi again! So while ztcfg ran without errors, now asterisk won't run. Here's the relevant part of the error: WARNING[13055]: chan_zap.c:921 zt_open: Unable to specify channel 1: No such device ERROR[13055]: chan_zap.c:6879 mkintf: Unable to open channel 1: No such device here = 0, tmp->channel = 1, channel = 1 Now I'm totally lost, so any help is really appreciated. Thanks! Ivan V.
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
