wcfxo is used only for the X100P (and some clones). It is not used for
any other card. wctdm supports both FXO and FXS. Maybe you are just
confused about which module is associated with which channel.
Iván Vega R. wrote:
Upon further investigation, I tried the following:
lsmod | grep 'wc*'
I can see wctdm (I believe this is the fxs module, no?), wcfxo,
zaptel... so I think so far so good. Then:
cat /proc/interrupts
There I only see the wctdm:
50: 9556184 0 IO-APIC-level uhci_hcd:usb3, wctdm
I reckon I should move the card to another slot or somehow disable the
USB port?
Also, wcfxo does not show up on the list, and I can see on the card
that the FXO port (I'm guessing it's that port) is not lit, while the
other 3 are. So I'm guessing it didn't get installed or something?
The plot thickens... Does anyone have any idea what the problem could be?
Thanks!
On 9/8/06, Iván Vega R. <[EMAIL PROTECTED]> wrote:
Hi again!
So while ztcfg ran without errors, now asterisk won't run. Here's the
relevant part of the error:
WARNING[13055]: chan_zap.c:921 zt_open: Unable to specify channel 1:
No such device
ERROR[13055]: chan_zap.c:6879 mkintf: Unable to open channel 1: No
such device here = 0, tmp->channel = 1, channel = 1
Now I'm totally lost, so any help is really appreciated.
Thanks!
Ivan V.
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
