Hello again Alberto!

Anyway, to get more info, try to open a second shell
and run /usr/lib/eicon/divas/xlog
then on the first shell redo the telsampl test, then
post the output of xlog off the list to my address
(alberto at msoft-italia.com)

This is the xlog output:
4:1736:074 - CREATEID ok: context:1f assigned Id:6 freeIds=eb
   4:1736:074 - alloc cr in use =4
   4:1736:076 - free cr in use =3
   4:1736:077 - DELETEID ok: deleted Id:6 freeIds=eb
   4:1736:078 - CREATEID ok: context:1f assigned Id:6 freeIds=eb
   4:1736:078 - alloc cr in use =4
   4:1736:080 - free cr in use =3
   4:1736:080 - DELETEID ok: deleted Id:6 freeIds=eb
   4:1736:081 - CREATEID ok: context:1f assigned Id:6 freeIds=eb
   4:1736:081 - alloc cr in use =4
   4:1736:083 - [1,0] dsp_assign 0016, 0, 2048
   4:1736:083 - [1,0] CAI[00] 16 00 00 00 00 08
   4:1736:084 - [1,0] Download 532 requested
   4:1736:084 - MORE
   4:1736:085 - SIG-X(029) 08 01 36 05 A1 04 03 80 90 A3 18 01 83 1E
02 80 83 70 0A 80 39 36 33 30 34 35 37 32 33
                    Q.931  CR36 SETUP
                           Sending complete
                           Bearer Capability 80 90 a3
                           Channel Id 83
                           Progress Indicator 80 83
                           Called Party Number 80 '963045723'
   4:1736:085 - SIG-S 0->1 e:885
   4:1736:087 - ACTIVATION_REQ
   4:1744:147 - L1_DOWN
   4:1744:150 - SIG-EVENT FFFF 08

   4:1744:150 - SIG-EVENT FFFF 08

   4:1744:150 - EVENT: Call failed in State 'Call initiated'
                    Link disconnected, Layer-1 error (cable or NT)
   4:1744:150 - SIG-S 1->0 e:ffff
   4:1744:151 - [1,0] dsp_release
   4:1744:155 - free cr in use =3
   4:1744:156 - DELETEID ok: deleted Id:6 freeIds=eb

I disconnect the rj45 cable from alcatel pbx and connect that to the
diva card (with alcatel pbx i can make calls normally). The green led
of the diva card is activated when i connect the cable. So i dont
understand why the message " Link disconnected, Layer-1 error (cable
or NT)"...
This debug is th same if the cable is connected to the NT or not.
Any ideas...? Thanks!
PS.
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to