Most certainly. This is my current file. I've toyed with the gain
settings, going as high as 100 on rxgain and even toyed with txgain for
a bit. It's very bare because I haven't invested any further time into
this machine until I get the gain figured out. On a side note, I've used
this card in a Xen VM running 1.2 and did not have any gain issues.
----------------------------------
; Zapata telephony interface
[trunkgroups]
;
[channels]
;
context=incoming
switchtype=national
;
signalling=fxs_ks
channel=>1
usecallerid=yes
cidsignalling=bell
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1
immediate=no
musiconhold=default
Tzafrir Cohen wrote:
On Tue, Dec 12, 2006 at 08:57:05AM -0600, jason wrote:
Hey guys, I'm having some trouble with gain settings using a Wildcard
X100P and Zaptel 1.4 Beta 2 on Asterisk 1.4 beta 3. My transmit volume
between an IAX client (idefisk) and a POTS device through my 1.4 box is
great, but my receive volume is terrible. I can hardly hear a word they
say. I've cranked my gains up to 100, inserted the wcfxo module with
boost=1, but haven't had any luck figuring this out. Using ztmonitor,
the best I can get on my RX side is 3 #'s (###)) and that's if I really
talk loudly into the phone. Any pointers on other places I can look?
Volume is great on IAX to IAX, only poor on calls from IAX to POTS. I
haven't tried the other direction because this box isn't setup to
receive POTS calls.
Could you post your zapata.conf ?
--
Jason
The place where you made your stand never mattered,
only that you were there... and still on your feet
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
