On Mon, 2006-12-18 at 22:19 +0200, Tzafrir Cohen wrote: > On Mon, Dec 18, 2006 at 02:10:23PM -0600, Michael Sullivan wrote: > > On Wed, 2006-12-13 at 14:21 +1100, Paul Hales wrote: > > > I would be very surprised if your modem is supported by Asterisk - but I > > > suppose it's worth a try. > > > > > > What does 'zap show status' and 'zap show channels' show in the Asterisk > > > CLI? > > > > > > PaulH > > > > OK. I got the Motorola X100P put in: > > > > Relevant lspci -v output: > > > > 05:01.0 Communication controller: Motorola Wildcard X100P > > Subsystem: Motorola Unknown device 0000 > > Flags: bus master, medium devsel, latency 32, IRQ 22 > > I/O ports at b800 [size=256] > > Memory at ff900000 (32-bit, non-prefetchable) [size=4K] > > Capabilities: [40] Power Management version 2 > > > > > > However, although I can modprobe wctdm successfully, ztcfg still balks: > > > > camille ~ # modprobe wctdm > > You need the module wcfxo. But maybe it was hotplugged/ > > > camille ~ # /sbin/ztcfg -vv > > > > Zaptel Configuration > > ====================== > > > > > > Channel map: > > > > Channel 02: FXS Kewlstart (Default) (Slaves: 02) > > 02? Are you sure?
Is that not right? That's what the pdf said - to put fxsks=2 in /etc/zaptel.conf > > > > > 1 channels configured. > > That is: this is what ztcfg tries to do. > > > > > ZT_CHANCONFIG failed on channel 2: No such device or address (6) > > But it fails. > > > > > > > "zap show channels" comes back with encouraging results though: > > > > camille*CLI> zap show channels > > Chan Extension Context Language MusicOnHold > > pseudo default > > > > > > Do I need to moprobe something else or alter my kernel config for ztcfg > > not to error? > > -Michael Sullivan- > > What do you see on /proc/zaptel/* camille ~ # cat /proc/zaptel/* Span 1: WCFXO/0 "Wildcard X100P Board 1" 1 WCFXO/0/0 Span 2: ZTDUMMY/1 "ZTDUMMY/1 1" > Try genzaptelconf ... Where do I get that? camille ~ # genzaptelconf bash: genzaptelconf: command not found _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users