Here's where I stand: camille asterisk # ztcfg -vv
Zaptel Configuration ====================== Channel map: Channel 01: FXS Kewlstart (Default) (Slaves: 01) 1 channels configured. camille*CLI> zap show status Description Alarms IRQ bpviol CRC4 Wildcard X100P Board 1 OK 0 0 0 ZTDUMMY/1 1 UNCONFIGUR 0 0 0 camille*CLI> zap show channels Chan Extension Context Language MusicOnHold pseudo from-pstn en camille*CLI> I entered all the configuration the seller from ebay sent me into /etc/asterisk/zapata.conf and continues with the pdf file. The pdf said to add the following lines to /etc/asterisk/extensions.conf: [incoming] ; incoming calls from the FXO port are directed to this context from zapata.conf exten => s,1,Answer( ) exten => s,2,Echo( ) This seemed strange to me because there was no incoming context explicitly declared in zapata.conf, but I added it to extensions.conf and restarted asterisk so that the new options would take effect. I called my home number (the number that's going into my computer) from my cell phone. I let it ring ten times. Nothing. I went back into extensions.conf and changed [incoming] to [from-pstn], restarted asterisk and tried again. Same results. What am I doing wrong? Why won't asterisk pick up? The pdf says it should... _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
