On Tue, 2006-12-19 at 00:09 +0200, Tzafrir Cohen wrote: > On Mon, Dec 18, 2006 at 03:53:55PM -0600, Michael Sullivan wrote: > > Here's where I stand: > > > > camille asterisk # ztcfg -vv > > > > Zaptel Configuration > > ====================== > > > > > > Channel map: > > > > Channel 01: FXS Kewlstart (Default) (Slaves: 01) > > > > 1 channels configured. > > > > camille*CLI> zap show status > > Description Alarms IRQ bpviol > > CRC4 > > Wildcard X100P Board 1 OK 0 0 > > 0 > > ZTDUMMY/1 1 UNCONFIGUR 0 0 > > 0 > > rmmod ztdummy, while you're at it. > > > camille*CLI> zap show channels > > Chan Extension Context Language MusicOnHold > > pseudo from-pstn en > > camille*CLI> > > > > I entered all the configuration the seller from ebay sent me > > into /etc/asterisk/zapata.conf and continues with the pdf file. The pdf > > said to add the following lines to /etc/asterisk/extensions.conf: > > > > [incoming] > > ; incoming calls from the FXO port are directed to this context from > > zapata.conf > > exten => s,1,Answer( ) > > exten => s,2,Echo( ) > > > > > > This seemed strange to me because there was no incoming context > > explicitly declared in zapata.conf, but I added it to extensions.conf > > and restarted asterisk so that the new options would take effect. I > > called my home number (the number that's going into my computer) from my > > cell phone. I let it ring ten times. Nothing. I went back into > > extensions.conf and changed [incoming] to [from-pstn], restarted > > asterisk and tried again. Same results. > > next time use 'reload' > > > What am I doing wrong? Why > > won't asterisk pick up? The pdf says it should... > > You seem to be trying to follow installation instructions that assume a > number of things about your installation. > > You can set the context in zapata.conf to 'incoming' > > context = incoming > > before the line 'channel => 1' > > Anyway: > > show dialplan from-pstn >
camille*CLI> zap show channels Chan Extension Context Language MusicOnHold pseudo incoming en camille*CLI> show dialplan incoming [ Context 'incoming' created by 'pbx_config' ] 's' => 1. Answer( ) [pbx_config] 2. Echo( ) [pbx_config] camille*CLI> -= 1 extension (2 priorities) in 1 context. =- camille*CLI> _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users