From: Jerry Geis <[EMAIL PROTECTED]>
It needed BOTH the text callerid and numerid callerid to display
the text form. Callerid: Some name < number>
Related to callerid: I can't get text ID to work in an analog phone on FXS.
I tried the above format, it simply displays the entire string in both
numeric and text field (i.e., displays the same string twice). Tried a few
other ways, got varied results (some resulting in "Unknown"). Nothing can
get the analog phone to display name in text field and number in numeric
field.
I'm using TDM400, phone is 27935GE3-B, Zaptel 1.2.10, Asterisk 1.2.12. On a
"normal" line, the phone displays name on one line and number on another.
Anyone sending caller ID to FXS?
Yuan Liu
At first I was only supplying the name. Works fine. Thanks,
Jerry
/From: Jerry Geis <geisj at pagestation.com
<http://lists.digium.com/mailman/listinfo/asterisk-users>>
/>/
/>/I have an F3000 phone utstarcom and sending a text message to it.
/>/All is working but there is a line of "sender: asterisk".
/>/How do I control what this line says?
/
Try sip.conf, callerid=...
Yuan Liu
/THanks,
/>/
/>/Jerry/
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
