From: Scott Walde <[EMAIL PROTECTED]>
I have the following dialplan (segment) that isn't working as I expected it
to:
exten => s,n,Dial(Zap/1&SIP/202&SIP/203,18)
exten => s,n,Dial(Zap/1&SIP/201&SIP/202&SIP/203,42)
Interestingly, although the Asterisk Manual (by Mark Spencer and so on)
contains an almost identical sample plan fragment, in reality, it seems to
need a Wait() in between to reset the Zap channel in the first Dial(). I
tested with TDM400. Inserted a 1-2 sec wait and it did what you wanted.
Yuan Liu
The plan was to have SIP/201 added to the group of ringing phones after 3
or so rings. What ends up happening, though, is the Zap/1 phone STOPs
ringing when the dialplan falls through to the second line. The log
reports:
Feb 4 09:20:52 WARNING[26889] chan_zap.c: Unable to ring phone: Device or
resou
rce busy
So, it seems to me that the Zap interface isn't ready yet to take another
call.
Is there another way I can accomplish the same thing? This method seems to
work great when I'm dealing with all SIP phones. This one kind of
blindsided me.
Thanks.
ttyl
srw
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
