I'm trying to set up a simple test box to start developing with Asterisk. I've got a Dell GX150 with two X100P cards. I've downloaded, printed out and read through most of TFOT. I've also done a lot of Internet searching.
I'm getting this error: ZT_CHANCONFIG failed on channel 1: No such device or address (6) Based on the searching I've done, it seems like the problem must be shared IRQ issues. I've gone in the BIOS and disabled everything I can but I can't stop the sharing completely. One X100P is shared with the built-in video and the other X100P is shared with a serial controller. (I disabled both serial ports) My question is this: (in three parts) 1) Are my research and assumptions accurate? Does this seem to be an IRQ issue? 2) If I have to build another system to prevent the IRQ problem, can anyone recommend hardware (just for a simple test box right now) 3) Is it worth keeping the X100Ps or should I get a TDM400P like used in TFOT, or something else? (again just for testing) If there are other things I should check first please let me know!! TIA!!!!! Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network Engineer Safe Data, Inc. (910) 285-7200 [EMAIL PROTECTED] _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users