----- Original Message ----- From: "Nic Bellamy" <[EMAIL PROTECTED]> To: "Asterisk Users Mailing List - Non-Commercial Discussion" <[email protected]> Sent: Friday, February 16, 2007 12:56 AM Subject: Re: [asterisk-users] The High Performance Echo Canceller (HPEC)
> Wireless wrote: > > Thanks Nic, I have bought a couple of HPEC channel licences from Digium and > > been trying to get them working, all seems fine until I get to 9 and 10 of > > this doc ftp://ftp.digium.com/pub/telephony/hpec/README - at which point > > Asterisk is not running and I've issued a: "wanrouter start" command and all > > looks good. > > > > 9 says type > > [EMAIL PROTECTED] ~]# modprobe zaptel > > > > which returns nothing... when I run 10 > > > > At this point, if you run "dmesg", do you find the following in your > kernel log? > > Digium High-Performance Echo Canceller, version 8.20 > Optimized for "i386" CPU architecture > Coypright (C) 2006 Digium, Inc. and Adaptive Digital Technologies, Inc. > This module is supplied under a commercial license granted by Digium, Inc. > Please see the full license text supplied by the accompanying > "register" utility, or ask for a copy from Digium. > > If not, you've probably not got Zaptel built with HPEC properly. > > [EMAIL PROTECTED] ~]# ./zaphpec_enable > > I get - No valid licenses for HPEC found. > > > > If anyone can shed I bit of light on how to register my licence I'd be very > > greatful, I've checked in /var/lib/digium/licenses and there is a licence > > there. > > > Hmm... not run into this myself - after registering my key, it worked > first pop for me, giving the following output: > > # ./zaphpec_enable > Digium High-Performance Echo Canceller Enabler > Copyright (C) 2006, Digium, Inc. > Version 1.0.0 > Use the '-l' option to see license information for software > included in this program. > > Found key 'HPEC-xxxxxxxxxxxx' for 4 channels. > Found valid HPEC licenses for 4 channels. > Successfully enabled 4 channels. > > After this, the follow line is spat out by the kernel: > > hpec_license_check: License granted for 4 channels > > > Cheers, > Nic. > > -- > Nic Bellamy, > Head Of Engineering, Vadacom Ltd - http://www.vadacom.co.nz/ > I'm truely stuck now, I cannot get HPEC to register with my Sangoma A200 card. I'm using Asterisk 1.2.15 Zaptel 1.2.13 Wanpipe drivers / util 2.3.4-7 I'm just not seeing any mention of HPEC in dmesg and I have tried different versions of the HPEC i386, i586, i686 and pentium3m the physical proc is a P3 650Mhz running CentOS 4.4 (Trixbox 2) I've rebuilt this box over the weekend from a fully patched CentOS 4.4 (yum update) as the hard drive failed! when I run ./register all seems ok then when I run ./zaphpec_enable it reports: No valid licenses for HPEC found. Any suggestions as to how I can debug what is not happening much appreciated Thanks Harvey _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
