On 5/21/07, Vieri <[EMAIL PROTECTED]> wrote:
Hi, My asterisk server was working with a 4-FXO analog card (TDM400P). I recently added two digital cards: a TE120P (1 PRI) and a B410P (4 BRI). The B410P is still unconfigured but inserted in a PCI slot. The TE120P's jumper is set to E1 as it will connect to a commercial PBX's PRI card also configured as E1. My analog channels used to be 1-4 but since I added the new cards I changed them to 101-104.
I could be wrong here, but I don't think you get to arbitrarily make up what the channel numbers. At least I've never done that; I let the first channel be 1, second one 2, etc, through all of the cards, based on loading order of the PCI cards. And are you sure about the loading order of the cards?
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
