We are trying to configure a Sangoma A101 card to allow both incoming and outgoing calls on a UK (BT) ISDN30e line with only 24 channels enabled.
At present incoming calls work fine. We can't call out -- we get a BUSY/CONGESTED error. Do we need another context in our zapata.conf? In other words, do we need to reserve, say, channels 17-24 for outgoing calls? I also wonder if the signalling type for these channels should be changed. I would be very grateful for any comments. Regards Rory zapata.conf ================================================================= ;autogenerated by /usr/local/sbin/config-zaptel do not hand edit ;Zaptel Channels Configurations (zapata.conf) ; ;For detailed zapata options, view /etc/asterisk/zapata.conf.orig ;Modified by Veselin Wed Aug 15 21:13:58 BST 2007 ; original saved in zapata.conf.ww [trunkgroups] [channels] language=en context=default usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=no echocancelwhenbridged=no relaxdtmf=yes rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1 immediate=no ;Sangoma A101 port 1 [slot:3 bus:2 span: 1] switchtype=euroisdn context=from-pstn group=0 signalling=pri_cpe channel => 1-15,17-31 -- Rory Campbell-Lange Director Campbell-Lange Workshop Ltd. <[EMAIL PROTECTED]> <www.campbell-lange.net> _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
