Rory Campbell-Lange wrote: > We are trying to configure a Sangoma A101 card to allow both incoming > and outgoing calls on a UK (BT) ISDN30e line with only 24 channels > enabled. > > At present incoming calls work fine. We can't call out -- we get a > BUSY/CONGESTED error.
What is your dialling plan command for outbound calls ? > > Do we need another context in our zapata.conf? In other words, do we > need to reserve, say, channels 17-24 for outgoing calls? I also wonder I think that your channel => 1-15,17-31 should be channel => 1-15,17-25 > if the signalling type for these channels should be changed. > > I would be very grateful for any comments. > > Regards > Rory > > > > zapata.conf > ================================================================= > > ;autogenerated by /usr/local/sbin/config-zaptel do not hand edit > ;Zaptel Channels Configurations (zapata.conf) > ; > ;For detailed zapata options, view /etc/asterisk/zapata.conf.orig > ;Modified by Veselin Wed Aug 15 21:13:58 BST 2007 > ; original saved in zapata.conf.ww > > [trunkgroups] > > [channels] > language=en > context=default > usecallerid=yes > hidecallerid=no > callwaiting=yes > usecallingpres=yes > callwaitingcallerid=yes > threewaycalling=yes > transfer=yes > canpark=yes > cancallforward=yes > callreturn=yes > echocancel=no > echocancelwhenbridged=no > relaxdtmf=yes > rxgain=0.0 > txgain=0.0 > group=1 > callgroup=1 > pickupgroup=1 > immediate=no > > ;Sangoma A101 port 1 [slot:3 bus:2 span: 1] > switchtype=euroisdn > context=from-pstn > group=0 > signalling=pri_cpe > channel => 1-15,17-31 > > _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
