Hi, I am in the process of working with my first asterisk box. It is configured with 1 FXO and 1 FXS port so I can test (play) with it.
About once a day it seems as though the FXS card goes brain dead. At least that is what I think is happening because when I pick up the analog phone there is no dial tone. When I stop the zaptel service and then start it I get the following error. [EMAIL PROTECTED] asterisk]# service zaptel stop Unloading zaptel hardware drivers: wcusb wcfxo Removing zaptel module: [ OK ] [EMAIL PROTECTED] asterisk]# service zaptel start Loading zaptel framework: [ OK ] Loading zaptel hardware modules: wcfxo wcusb Running ztcfg: ZT_CHANCONFIG failed on channel 2: No such device or address (6) [FAILED] Shorlty after this message the box looses network connectivity, I cannot ping it but I do have access from the console but still no network. FWIW, ifconfig -a shows the interface "up" I am currently running this version of * asterisk*CLI> show version Asterisk CVS-11/30/03-13:40:23 built by [EMAIL PROTECTED] on a i686 running Linux And this fedora kernel linux-2.4.22-1.2129.nptl Any ideas ? Any help greatly appreciated. Thank you in advance, -Billh ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program. -- This message has been scanned for viruses and dangerous content by the Bugs.Hamel.Net MailScanner, and appears to be clean. _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
