Hi, Thank you for the reply, actually the cards installed are a TDM400P (Single port) and an X100P.
I don't need to power down the PCI cards by turning of the PC, a simple "shutdown -r now" does it. -bh Quoting Tilghman Lesher <[EMAIL PROTECTED]>: > On Thursday 11 December 2003 17:42, [EMAIL PROTECTED] wrote: > > [EMAIL PROTECTED] asterisk]# service zaptel start > > Loading zaptel framework: [ OK ] > > Loading zaptel hardware modules: wcfxo wcusb > > Running ztcfg: ZT_CHANCONFIG failed on channel 2: No such device > > or address (6) [FAILED] > > Typically this means that the driver cannot detect the device. Since > it is the S100U that seems to be undetected, try unplugging it, > waiting 20 seconds, and plugging it back in. > > -Tilghman > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > > -- > This message has been scanned for viruses and > dangerous content by The CCIS.net MailScanner, and is > believed to be clean. > > > -- > This message has been scanned for viruses and > dangerous content by the Bugs.Hamel.Net MailScanner, > and appears to be clean. > > -- ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program. -- This message has been scanned for viruses and dangerous content by the Bugs.Hamel.Net MailScanner, and appears to be clean. _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
