Please reply to the list only. I read the list; I do not need two copies of your response.
On Thursday 11 December 2003 18:47, [EMAIL PROTECTED] wrote: > Quoting Tilghman Lesher <[EMAIL PROTECTED]>: > > On Thursday 11 December 2003 17:42, [EMAIL PROTECTED] wrote: > > > [EMAIL PROTECTED] asterisk]# service zaptel start > > > Loading zaptel framework: [ OK ] > > > Loading zaptel hardware modules: wcfxo wcusb > > > Running ztcfg: ZT_CHANCONFIG failed on channel 2: No such device > > > or address (6) [FAILED] > > > > Typically this means that the driver cannot detect the device. > > Since it is the S100U that seems to be undetected, try unplugging > > it, waiting 20 seconds, and plugging it back in. > > Thank you for the reply, actually the cards installed are a TDM400P > (Single port) and an X100P. > > I don't need to power down the PCI cards by turning of the PC, a > simple "shutdown -r now" does it. Then you're loading the wrong modules. The TDM400P does not use the wcusb driver; it uses the wcfxs driver. If you use the right module for your hardware, then I suspect you won't have any problems. -Tilghman _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
