On Mon, Dec 15, 2003 at 05:06:57PM +0200, Dan wrote: > Hi, > > >----- Original Message ----- > >From: "Walker Haddock" <[EMAIL PROTECTED]> > > > > Dan, you say fax works better on the TDM400 than the ATA186. I'm having > problems with faxing on the TDM400. > > I had to drop the rx and tx rates on the fax machine down to 4800 baud to > get it to work. I have ordered an ATA186 > > to see if I get better results. > > > I have tried with several fax devices and have no problem with TDM400 > /X100P. > > > What rx and tx rates are you able to get to work through these devices? > The default 9600 one.
I tried 9600, most of the time the fax would auto negotiate this but it would get too many bad lines and cancel. > It can be a problem of X100 tuning for your provider line. I'm usint a T1 PRI through a T100P for the other channel in the connection. I have disabled all echo cancel. I don't see how it can be caused by anything but hte TDM400. I'll go ahead and test with the ATA and see if I get better results. > If it does not work on TDM400, then for sure it will not work on ATA, in my > opinion. -- ******** DataCrest, Inc. -- Technically Superior ****************** Walker Haddock http://www.datacrest.com DataCrest, Inc. e-mail: [EMAIL PROTECTED] 1634A Montgomery Hwy. phone: 1-888-941-3282, 1-205-335-8589 Birmingham, AL 35216 fax: 1-205-823-7838 *********************************************************************** _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
