On Mon, Dec 15, 2003 at 05:06:57PM +0200, Dan wrote:
Hi,
----- Original Message ----- From: "Walker Haddock" <[EMAIL PROTECTED]>problems with faxing on the TDM400.
Dan, you say fax works better on the TDM400 than the ATA186. I'm having
I had to drop the rx and tx rates on the fax machine down to 4800 baud toget it to work. I have ordered an ATA186
to see if I get better results.
I have tried with several fax devices and have no problem with TDM400 /X100P.
What rx and tx rates are you able to get to work through these devices?The default 9600 one.
I tried 9600, most of the time the fax would auto negotiate this but it would get too many bad lines and cancel.
It can be a problem of X100 tuning for your provider line.
I'm usint a T1 PRI through a T100P for the other channel in the connection. I have disabled all echo cancel. I don't see how it can be caused by anything but hte TDM400. I'll go ahead and test with the ATA and see if I get better results.
If it does not work on TDM400, then for sure it will not work on ATA, in my
opinion.
Its probably frame slips. Check the clock source for your T1, and make sure you are syncing to the PSTN.
Regards, Steve
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
