Running Cisco Call Manager 6.1 and Asterisk 1.4. CCM is connected to a T1, Asterisk is running strictly VoIP over the network and using CCM as the trunk.
Calls from the SIP phones connected to Asterisk work fine. They can call both external numbers and any Cisco extensions attached to CCM. Calls from CCM to Asterisk fail without any notification in Asterisk (and I DID have this working at one point, but I suspect that our Telco may have pooched the config somehow, since they're in the process of connecting us to another CCM site). I have verified: Media Termination point exists, Calling Search Space exists, Trunk is properly defined (uLaw 711, UDP, ip address & port, etc), and a route pattern exists to take calls to the right trunk. The system will let me complete the dialing sequence to the Asterisk server, but as soon as I enter the last digit I get a busy signal. Thoughts anyone? Here's my sip.conf if that helps... [callman] type=peer context=incoming insecure=very host=(ip of my call manager server) disallow=all allow=ulaw allow=alaw nat=no canreinvite=yes qualify=yes Thanks! Aaron
_______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
