More information: Wireshark running on the * box shows that the request is being received, but rejected:
Request: INVITE sip:2247@(ipaddress of *):5060, with session description Status: 407 Proxy Authentication Required Request: ACK sip:2247@(ipaddress of *):5060 Did I miss a security setting? On Tue, Mar 11, 2008 at 6:11 AM, Aaron Fransen <[EMAIL PROTECTED]> wrote: > > Running Cisco Call Manager 6.1 and Asterisk 1.4. CCM is connected to a T1, > Asterisk is running strictly VoIP over the network and using CCM as the > trunk. > > Calls from the SIP phones connected to Asterisk work fine. They can call > both external numbers and any Cisco extensions attached to CCM. > > Calls from CCM to Asterisk fail without any notification in Asterisk (and > I DID have this working at one point, but I suspect that our Telco may have > pooched the config somehow, since they're in the process of connecting us to > another CCM site). > > I have verified: Media Termination point exists, Calling Search Space > exists, Trunk is properly defined (uLaw 711, UDP, ip address & port, etc), > and a route pattern exists to take calls to the right trunk. > > The system will let me complete the dialing sequence to the Asterisk > server, but as soon as I enter the last digit I get a busy signal. > > Thoughts anyone? > > Here's my sip.conf if that helps... > > [callman] > type=peer > context=incoming > insecure=very > host=(ip of my call manager server) > disallow=all > allow=ulaw > allow=alaw > nat=no > canreinvite=yes > qualify=yes > > Thanks! Aaron >
_______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
