I'm at a loss. I have completely removed the route pattern and SIP trunk from Call Manager, then added them again, and I get the same results.
Any ideas anyone? On Tue, Mar 11, 2008 at 8:15 AM, Aaron Fransen <[EMAIL PROTECTED]> wrote: > > On Tue, Mar 11, 2008 at 6:11 AM, Aaron Fransen <[EMAIL PROTECTED]> > wrote: > > > > > Running Cisco Call Manager 6.1 and Asterisk 1.4. CCM is connected to a > > T1, Asterisk is running strictly VoIP over the network and using CCM as the > > trunk. > > > > Calls from the SIP phones connected to Asterisk work fine. They can call > > both external numbers and any Cisco extensions attached to CCM. > > > > Calls from CCM to Asterisk fail without any notification in Asterisk > > (and I DID have this working at one point, but I suspect that our Telco may > > have pooched the config somehow, since they're in the process of connecting > > us to another CCM site). > > > > I have verified: Media Termination point exists, Calling Search Space > > exists, Trunk is properly defined (uLaw 711, UDP, ip address & port, etc), > > and a route pattern exists to take calls to the right trunk. > > > > The system will let me complete the dialing sequence to the Asterisk > > server, but as soon as I enter the last digit I get a busy signal. > > > > Thoughts anyone? > > > > Here's my sip.conf if that helps... > > > > [callman] > > type=peer > > context=incoming > > insecure=very > > host=(ip of my call manager server) > > disallow=all > > allow=ulaw > > allow=alaw > > nat=no > > canreinvite=yes > > qualify=yes > > > > Thanks! Aaron > > > >
_______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
