The cable needed for this is a different cable than an ethernet cross over. I have actually done this same thing today with a Samsung 100 system and Asterisk 1.4.20.1 and Zaptel 1.4.11 and things work great.
A question of my own: I know I can emulate the network side of a pri connection, but can I do this same trick with other t1 standards like ani and others? If I can be a client on the different t1 types, does this also mean I can be the server side and feed back the different standards to legacy equipment as well or are there some limitations to this? Thanks, Tom -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Lee Wilson Sent: Friday, February 13, 2009 4:19 AM To: [email protected] Subject: [asterisk-users] PRI Test Lab Hey Everyone, I would like to start testing/playing with PRI channels but I don't have access to a PRI line. Is it possible to do the equivilent of a crossover between two PRI Cards (say Digium's TE120P)? What I was thinking is that I could set one asterisk box up with a PRI card set as the TE and provide clocking and another box exactly the same but with the card setup as NT. I think I would also need to wire up the correct type of crossover as a standard ethernet crossover would not work or would it? Thanks in advance. Lee _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
