Okay, I can't find what might be causing this. Here is what I got: Asterisk server hooked up to a digital T1 line (full 24-channel) via a Digium card. Verizon has turned on caller ID on the first line (I can guarantee it is on as I can hear the FSK tones on this line but not the others). Using zttool an ZapScan() I have determined the following:
1) The RxB/RxD bits toggle from 1 to 0 signaling a ring. 2) A short time later, via ZapScan() I can hear the FSK tone. 3) About the same time I hear the FSK tone I see the "Starting simple switch" line in the Asterisk console. 4) Next I see the second ring trigger in zttool and then Asterisk say "ss_thread: Got event 18 (Ring Begin)". Caller ID never shows up. I have tried cranking the rxgain up thinking maybe it was too quiet for Asterisk to detect but that did not help. My caller id settings in zapata.conf are: usecallerid=yes callerid=asreceived cidsignalling=bell cidstart=ring signalling=fxs_ks Is there any existing debug options I can turn on, or do I need to add some to try and figure out what is going on; or does somebody have an instant answer for me? Thanks, Daniel _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
