On May 1, 2009, at 7:18 AM, Andrew Joakimsen wrote: > The *BEST* solution would be to have Verizon switch you over to a PRI.
Assuming they were able to do this without a dramatic increase to our bill, would the same hardware still work? Sorry I don't have the exact model number but it is Digium's 2-port digital interface card with HW echo canceler, using the wct4xxp driver. Daniel > On Wed, Apr 29, 2009 at 17:29, Daniel Hazelbaker > <[email protected]> wrote: >> Okay, I can't find what might be causing this. Here is what I got: >> >> Asterisk server hooked up to a digital T1 line (full 24-channel) >> via a >> Digium card. >> Verizon has turned on caller ID on the first line (I can guarantee it >> is on as I can hear the FSK tones on this line but not the others). >> Using zttool an ZapScan() I have determined the following: >> >> 1) The RxB/RxD bits toggle from 1 to 0 signaling a ring. >> 2) A short time later, via ZapScan() I can hear the FSK tone. >> 3) About the same time I hear the FSK tone I see the "Starting simple >> switch" line in the Asterisk console. >> 4) Next I see the second ring trigger in zttool and then Asterisk say >> "ss_thread: Got event 18 (Ring Begin)". >> >> Caller ID never shows up. I have tried cranking the rxgain up >> thinking maybe it was too quiet for Asterisk to detect but that did >> not help. My caller id settings in zapata.conf are: >> >> usecallerid=yes >> callerid=asreceived >> cidsignalling=bell >> cidstart=ring >> signalling=fxs_ks >> >> Is there any existing debug options I can turn on, or do I need to >> add >> some to try and figure out what is going on; or does somebody have an >> instant answer for me? >> >> Thanks, >> Daniel >> >> _______________________________________________ >> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >> >> asterisk-users mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users >> > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
