>From: [email protected]
>[mailto:[email protected]]on Behalf Of
>John covici
>Sent: Monday, May 18, 2009 05:00 PM
>To: Asterisk Users Mailing List - Non-Commercial Discussion
>Subject: Re: [asterisk-users] Step-by-Step Asterisk and MeetMe Help
>
>
>This is your problem -- check the compile of the zaptel package and
>see what happened. It might not compile it if you have a hardware
>zaptel crd, otherwise it should have done so.
I stopped asterisk.
I have no card. From the zaptel directory I ran
# make distclean
# make clean
# ./configure
# make menuselect
In menuselect I removed all Kernel Modules except for ztdummy
# make
--------------output of make command --------------
[r...@localhost zaptel-1.4.12.1]# make
make[1]: Entering directory `/usr/src/zaptel-1.4.12.1'
make -C /usr/src/linux-2.4 ARCH=i386 SUBDIRS=/usr/src/zaptel-1.4.12.1/kernel
HOTPLUG_FIRMWARE=yes KBUILD_OBJ_M="zaptel.o ztdummy.
o " modules
make[2]: Entering directory `/usr/src/kernels/2.6.9-78.0.13.EL-smp-i686'
CC [M] /usr/src/zaptel-1.4.12.1/kernel/zaptel-base.o
/usr/src/zaptel-1.4.12.1/kernel/zaptel-base.c: In function `__zt_receive_chunk':
/usr/src/zaptel-1.4.12.1/kernel/zaptel-base.c:6703: warning: 'res' might be
used uninitialized in this function
LD [M] /usr/src/zaptel-1.4.12.1/kernel/zaptel.o
CC [M] /usr/src/zaptel-1.4.12.1/kernel/ztdummy.o
Building modules, stage 2.
MODPOST
CC /usr/src/zaptel-1.4.12.1/kernel/zaptel.mod.o
LD [M] /usr/src/zaptel-1.4.12.1/kernel/zaptel.ko
CC /usr/src/zaptel-1.4.12.1/kernel/ztdummy.mod.o
LD [M] /usr/src/zaptel-1.4.12.1/kernel/ztdummy.ko
make[2]: Leaving directory `/usr/src/kernels/2.6.9-78.0.13.EL-smp-i686'
gcc -c -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA
-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o zonedata.lo
zonedata.c
gcc -c -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA
-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o tonezone.lo
tonezone.c
gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA
-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -shared -Wl,-sonam
e,libtonezone.so.1.0 -o libtonezone.so
zonedata.lo tonezone.lo -lm
gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA
-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c -o zonedata.o
zonedata.c
gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA
-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c -o tonezone.o
tonezone.c
ar rcs libtonezone.a zonedata.o tonezone.o
ranlib libtonezone.a
gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA
-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o fxotune.o -c fx
otune.c
gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA
-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o fxotune fxotune
.o -lm
gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA
-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o ztcfg.o -c ztcf
g.c
gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA
-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o ztcfg ztcfg.o l
ibtonezone.a -lm
gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA
-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o ztmonitor.o -c
ztmonitor.c
gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA
-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o ztmonitor ztmon
itor.o
gcc -o ztspeed.o -c ztspeed.c
gcc -o ztspeed ztspeed.o
gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA
-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o zttest.o -c ztt
est.c
gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA
-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o zttest zttest.o
gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA
-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o ztscan.o -c zts
can.c
gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA
-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o ztscan ztscan.o
gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA
-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o zttool.o -c zt
tool.c
gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA
-DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o zttool zttool.o
-lnewt
make[1]: Leaving directory `/usr/src/zaptel-1.4.12.1'
----------------- end output of make command -------------------
# make install
-------------- output of make install command --------------
[r...@localhost zaptel-1.4.12.1]# make install
make[1]: Entering directory `/usr/src/zaptel-1.4.12.1'
make -C /usr/src/linux-2.4 ARCH=i386 SUBDIRS=/usr/src/zaptel-1.4.12.1/kernel
HOTPLUG_FIRMWARE=yes KBUILD_OBJ_M="zaptel.o ztdummy.o " modules
make[2]: Entering directory `/usr/src/kernels/2.6.9-78.0.13.EL-smp-i686'
Building modules, stage 2.
MODPOST
make[2]: Leaving directory `/usr/src/kernels/2.6.9-78.0.13.EL-smp-i686'
make[1]: Leaving directory `/usr/src/zaptel-1.4.12.1'
install -d /etc/udev/rules.d
build_tools/genudevrules > /etc/udev/rules.d/zaptel.rules
build_tools/uninstall-modules dahdi 2.6.9-78.ELsmp
make -C /usr/src/linux-2.4 ARCH=i386 SUBDIRS=/usr/src/zaptel-1.4.12.1/kernel
HOTPLUG_FIRMWARE=yes KBUILD_OBJ_M="zaptel.o ztdummy.o " INSTALL_MOD_PATH=
INSTALL_MOD_DIR=misc modules_install
make[1]: Entering directory `/usr/src/kernels/2.6.9-78.0.13.EL-smp-i686'
INSTALL /usr/src/zaptel-1.4.12.1/kernel/zaptel.ko
INSTALL /usr/src/zaptel-1.4.12.1/kernel/ztdummy.ko
make[1]: Leaving directory `/usr/src/kernels/2.6.9-78.0.13.EL-smp-i686'
[ `id -u` = 0 ] && /sbin/depmod -a 2.6.9-78.ELsmp || :
install -d /sbin
install fxotune ztcfg ztmonitor ztspeed zttest ztscan zttool /sbin/
install -d /usr/share/man/man8
install -m 644 doc/fxotune.8 doc/ztcfg.8 doc/ztmonitor.8 doc/ztspeed.8
doc/zttest.8 doc/ztscan.8 doc/zttool.8 /usr/share/man/man8/
/usr/bin/install -c -D -m 755 libtonezone.a /usr/lib/libtonezone.a
/usr/bin/install -c -D -m 755 libtonezone.so /usr/lib/libtonezone.so.1.0
if [ `id -u` = 0 ]; then \
/sbin/ldconfig || : ;\
fi
rm -f /usr/liblibtonezone.so
/bin/ln -sf libtonezone.so.1.0 \
/usr/lib/libtonezone.so.1
/bin/ln -sf libtonezone.so.1.0 \
/usr/lib/libtonezone.so
/sbin/restorecon -v /usr/lib/libtonezone.so
/usr/bin/install -c -D -m 644 kernel/zaptel.h /usr/include/zaptel/zaptel.h
/usr/bin/install -c -D -m 644 tonezone.h /usr/include/zaptel/tonezone.h
make -C firmware hotplug-install DESTDIR= HOTPLUG_FIRMWARE=yes
make[1]: Entering directory `/usr/src/zaptel-1.4.12.1/firmware'
make[1]: Nothing to be done for `hotplug-install'.
make[1]: Leaving directory `/usr/src/zaptel-1.4.12.1/firmware'
###################################################
###
### Zaptel installed successfully.
### If you have not done so before, install init scripts with:
###
### make config
###
###################################################
[r...@localhost zaptel-1.4.12.1]#
-------------- end output of make install command --------------
# make config
-------------- output of make config command --------------
[r...@localhost zaptel-1.4.12.1]# make config
install -D zaptel.init /etc/rc.d/init.d/zaptel
install -D ifup-hdlc /etc/sysconfig/network-scripts/ifup-hdlc
/sbin/chkconfig --add zaptel
Zaptel has been configured.
If you have any zaptel hardware it is now recommended to
edit /etc/default/zaptel or /etc/sysconfig/zaptel and set there an
optimal value for the variable MODULES .
I think that the zaptel hardware you have on your system is:
[r...@localhost zaptel-1.4.12.1]#
-------------- end output of make config command --------------
I rebooted the server with command:
#init 6
Server reboots and I see these same errors:
> May 18 14:46:59 localhost modprobe: FATAL: Module zaptel not found.
> May 18 14:46:59 localhost zaptel: Loading zaptel framework: failed
> On boot I also see "Waiting for zap to come online...Error: missing /dev/zap!
>
>on Monday 05/18/2009 Jimmy Ezell([email protected]) wrote
> >
> > >
> > >I would modprobe ztdummy and see what happens and look at
>the log and
> > >lsmod after you do that.
> > >
> > >--
> > >Your life is like a penny. You're going to lose it. The
>question is:
> > >How do
> > >you spend it?
> > >
> > > John Covici
> > > [email protected]
> >
> > John,
> >
> > modprobe comes back right away with ztdummy not found
> >
> > [r...@localhost zaptel-1.4.12.1]# modprobe ztdummy
> > FATAL: Module ztdummy not found.
> >
> > >
> >
> > _______________________________________________
> > -- Bandwidth and Colocation Provided by
>http://www.api-digital.com --
> >
> > asterisk-users mailing
>list
> > To UNSUBSCRIBE or update options visit:
> > http://lists.digium.com/mailman/listinfo/asterisk-users
>
>--
>Your life is like a penny. You're going to lose it. The question is:
>How do
>you spend it?
>
> John Covici
> [email protected]
>
>_______________________________________________
>-- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
>asterisk-users mailing list
>To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
