On reading your mail more carefully, it looks like you do have ztdummy, do depmod -a and then try to modprobe it.
on Monday 05/18/2009 Jimmy Ezell([email protected]) wrote > > >From: [email protected] > >[mailto:[email protected]]on Behalf Of > >John covici > >Sent: Monday, May 18, 2009 05:00 PM > >To: Asterisk Users Mailing List - Non-Commercial Discussion > >Subject: Re: [asterisk-users] Step-by-Step Asterisk and MeetMe Help > > > > > >This is your problem -- check the compile of the zaptel package and > >see what happened. It might not compile it if you have a hardware > >zaptel crd, otherwise it should have done so. > > I stopped asterisk. > > I have no card. From the zaptel directory I ran > # make distclean > # make clean > # ./configure > # make menuselect > In menuselect I removed all Kernel Modules except for ztdummy > # make > > --------------output of make command -------------- > [r...@localhost zaptel-1.4.12.1]# make > make[1]: Entering directory `/usr/src/zaptel-1.4.12.1' > make -C /usr/src/linux-2.4 ARCH=i386 SUBDIRS=/usr/src/zaptel-1.4.12.1/kernel > HOTPLUG_FIRMWARE=yes KBUILD_OBJ_M="zaptel.o ztdummy. > o " modules > make[2]: Entering directory `/usr/src/kernels/2.6.9-78.0.13.EL-smp-i686' > CC [M] /usr/src/zaptel-1.4.12.1/kernel/zaptel-base.o > /usr/src/zaptel-1.4.12.1/kernel/zaptel-base.c: In function > `__zt_receive_chunk': > /usr/src/zaptel-1.4.12.1/kernel/zaptel-base.c:6703: warning: 'res' might be > used uninitialized in this function > LD [M] /usr/src/zaptel-1.4.12.1/kernel/zaptel.o > CC [M] /usr/src/zaptel-1.4.12.1/kernel/ztdummy.o > Building modules, stage 2. > MODPOST > CC /usr/src/zaptel-1.4.12.1/kernel/zaptel.mod.o > LD [M] /usr/src/zaptel-1.4.12.1/kernel/zaptel.ko > CC /usr/src/zaptel-1.4.12.1/kernel/ztdummy.mod.o > LD [M] /usr/src/zaptel-1.4.12.1/kernel/ztdummy.ko > make[2]: Leaving directory `/usr/src/kernels/2.6.9-78.0.13.EL-smp-i686' > gcc -c -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA > -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o zonedata.lo > zonedata.c > gcc -c -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA > -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o tonezone.lo > tonezone.c > gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA > -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -shared -Wl,-sonam > e,libtonezone.so.1.0 -o libtonezone.so > zonedata.lo tonezone.lo -lm > gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA > -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c -o zonedata.o > zonedata.c > gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA > -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c -o tonezone.o > tonezone.c > ar rcs libtonezone.a zonedata.o tonezone.o > ranlib libtonezone.a > gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA > -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o fxotune.o -c fx > otune.c > gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA > -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o fxotune fxotune > .o -lm > gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA > -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o ztcfg.o -c ztcf > g.c > gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA > -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o ztcfg ztcfg.o l > ibtonezone.a -lm > gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA > -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o ztmonitor.o -c > ztmonitor.c > gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA > -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o ztmonitor ztmon > itor.o > gcc -o ztspeed.o -c ztspeed.c > gcc -o ztspeed ztspeed.o > gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA > -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o zttest.o -c ztt > est.c > gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA > -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o zttest zttest.o > > gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA > -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o ztscan.o -c zts > can.c > gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA > -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o ztscan ztscan.o > > gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA > -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o zttool.o -c zt > tool.c > gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA > -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o zttool zttool.o > -lnewt > make[1]: Leaving directory `/usr/src/zaptel-1.4.12.1' > ----------------- end output of make command ------------------- > > > # make install > -------------- output of make install command -------------- > [r...@localhost zaptel-1.4.12.1]# make install > make[1]: Entering directory `/usr/src/zaptel-1.4.12.1' > make -C /usr/src/linux-2.4 ARCH=i386 SUBDIRS=/usr/src/zaptel-1.4.12.1/kernel > HOTPLUG_FIRMWARE=yes KBUILD_OBJ_M="zaptel.o ztdummy.o " modules > make[2]: Entering directory `/usr/src/kernels/2.6.9-78.0.13.EL-smp-i686' > Building modules, stage 2. > MODPOST > make[2]: Leaving directory `/usr/src/kernels/2.6.9-78.0.13.EL-smp-i686' > make[1]: Leaving directory `/usr/src/zaptel-1.4.12.1' > install -d /etc/udev/rules.d > build_tools/genudevrules > /etc/udev/rules.d/zaptel.rules > build_tools/uninstall-modules dahdi 2.6.9-78.ELsmp > make -C /usr/src/linux-2.4 ARCH=i386 SUBDIRS=/usr/src/zaptel-1.4.12.1/kernel > HOTPLUG_FIRMWARE=yes KBUILD_OBJ_M="zaptel.o ztdummy.o " INSTALL_MOD_PATH= > INSTALL_MOD_DIR=misc modules_install > make[1]: Entering directory `/usr/src/kernels/2.6.9-78.0.13.EL-smp-i686' > INSTALL /usr/src/zaptel-1.4.12.1/kernel/zaptel.ko > INSTALL /usr/src/zaptel-1.4.12.1/kernel/ztdummy.ko > make[1]: Leaving directory `/usr/src/kernels/2.6.9-78.0.13.EL-smp-i686' > [ `id -u` = 0 ] && /sbin/depmod -a 2.6.9-78.ELsmp || : > install -d /sbin > install fxotune ztcfg ztmonitor ztspeed zttest ztscan zttool /sbin/ > install -d /usr/share/man/man8 > install -m 644 doc/fxotune.8 doc/ztcfg.8 doc/ztmonitor.8 doc/ztspeed.8 > doc/zttest.8 doc/ztscan.8 doc/zttool.8 /usr/share/man/man8/ > /usr/bin/install -c -D -m 755 libtonezone.a /usr/lib/libtonezone.a > /usr/bin/install -c -D -m 755 libtonezone.so /usr/lib/libtonezone.so.1.0 > if [ `id -u` = 0 ]; then \ > /sbin/ldconfig || : ;\ > fi > rm -f /usr/liblibtonezone.so > /bin/ln -sf libtonezone.so.1.0 \ > /usr/lib/libtonezone.so.1 > /bin/ln -sf libtonezone.so.1.0 \ > /usr/lib/libtonezone.so > /sbin/restorecon -v /usr/lib/libtonezone.so > /usr/bin/install -c -D -m 644 kernel/zaptel.h /usr/include/zaptel/zaptel.h > /usr/bin/install -c -D -m 644 tonezone.h /usr/include/zaptel/tonezone.h > make -C firmware hotplug-install DESTDIR= HOTPLUG_FIRMWARE=yes > make[1]: Entering directory `/usr/src/zaptel-1.4.12.1/firmware' > make[1]: Nothing to be done for `hotplug-install'. > make[1]: Leaving directory `/usr/src/zaptel-1.4.12.1/firmware' > ################################################### > ### > ### Zaptel installed successfully. > ### If you have not done so before, install init scripts with: > ### > ### make config > ### > ################################################### > [r...@localhost zaptel-1.4.12.1]# > -------------- end output of make install command -------------- > # make config > -------------- output of make config command -------------- > [r...@localhost zaptel-1.4.12.1]# make config > install -D zaptel.init /etc/rc.d/init.d/zaptel > install -D ifup-hdlc /etc/sysconfig/network-scripts/ifup-hdlc > /sbin/chkconfig --add zaptel > Zaptel has been configured. > > If you have any zaptel hardware it is now recommended to > edit /etc/default/zaptel or /etc/sysconfig/zaptel and set there an > optimal value for the variable MODULES . > > I think that the zaptel hardware you have on your system is: > [r...@localhost zaptel-1.4.12.1]# > -------------- end output of make config command -------------- > > I rebooted the server with command: > #init 6 > > Server reboots and I see these same errors: > > May 18 14:46:59 localhost modprobe: FATAL: Module zaptel not found. > > May 18 14:46:59 localhost zaptel: Loading zaptel framework: failed > > On boot I also see "Waiting for zap to come online...Error: missing > /dev/zap! > > > > > >on Monday 05/18/2009 Jimmy Ezell([email protected]) wrote > > > > > > > > > > >I would modprobe ztdummy and see what happens and look at > >the log and > > > >lsmod after you do that. > > > > > > > >-- > > > >Your life is like a penny. You're going to lose it. The > >question is: > > > >How do > > > >you spend it? > > > > > > > > John Covici > > > > [email protected] > > > > > > John, > > > > > > modprobe comes back right away with ztdummy not found > > > > > > [r...@localhost zaptel-1.4.12.1]# modprobe ztdummy > > > FATAL: Module ztdummy not found. > > > > > > > > > > > > > _______________________________________________ > > > -- Bandwidth and Colocation Provided by > >http://www.api-digital.com -- > > > > > > asterisk-users mailing > >list > > > To UNSUBSCRIBE or update options visit: > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > >-- > >Your life is like a penny. You're going to lose it. The question is: > >How do > >you spend it? > > > > John Covici > > [email protected] > > > >_______________________________________________ > >-- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > > >asterisk-users mailing list > >To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users -- Your life is like a penny. You're going to lose it. The question is: How do you spend it? John Covici [email protected] _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
