>-----Original Message----- >From: [email protected] >[mailto:[email protected]]on Behalf Of >John covici >Sent: Monday, May 18, 2009 06:05 PM >To: Asterisk Users Mailing List - Non-Commercial Discussion >Subject: Re: [asterisk-users] Step-by-Step Asterisk and MeetMe Help > > >On reading your mail more carefully, it looks like you do have >ztdummy, do depmod -a and then try to modprobe it.
Same thing happens [r...@localhost ~]# depmod -a [r...@localhost ~]# modprobe ztdummy FATAL: Module ztdummy not found. Jimmy > >on Monday 05/18/2009 Jimmy Ezell([email protected]) wrote > > > > >From: [email protected] > > >[mailto:[email protected]]on Behalf Of > > >John covici > > >Sent: Monday, May 18, 2009 05:00 PM > > >To: Asterisk Users Mailing List - Non-Commercial Discussion > > >Subject: Re: [asterisk-users] Step-by-Step Asterisk and MeetMe Help > > > > > > > > >This is your problem -- check the compile of the zaptel package and > > >see what happened. It might not compile it if you have a hardware > > >zaptel crd, otherwise it should have done so. > > > > I stopped asterisk. > > > > I have no card. From the zaptel directory I ran > > # make distclean > > # make clean > > # ./configure > > # make menuselect > > In menuselect I removed all Kernel Modules except for ztdummy > > # make > > > > --------------output of make command -------------- > > [r...@localhost zaptel-1.4.12.1]# make > > make[1]: Entering directory `/usr/src/zaptel-1.4.12.1' > > make -C /usr/src/linux-2.4 ARCH=i386 >SUBDIRS=/usr/src/zaptel-1.4.12.1/kernel HOTPLUG_FIRMWARE=yes >KBUILD_OBJ_M="zaptel.o ztdummy. > o " modules > > make[2]: Entering directory >`/usr/src/kernels/2.6.9-78.0.13.EL-smp-i686' > > CC [M] /usr/src/zaptel-1.4.12.1/kernel/zaptel-base.o > > /usr/src/zaptel-1.4.12.1/kernel/zaptel-base.c: In function >`__zt_receive_chunk': > > /usr/src/zaptel-1.4.12.1/kernel/zaptel-base.c:6703: >warning: 'res' might be used uninitialized in this function > > LD [M] /usr/src/zaptel-1.4.12.1/kernel/zaptel.o > > CC [M] /usr/src/zaptel-1.4.12.1/kernel/ztdummy.o > > Building modules, stage 2. > > MODPOST > > CC /usr/src/zaptel-1.4.12.1/kernel/zaptel.mod.o > > LD [M] /usr/src/zaptel-1.4.12.1/kernel/zaptel.ko > > CC /usr/src/zaptel-1.4.12.1/kernel/ztdummy.mod.o > > LD [M] /usr/src/zaptel-1.4.12.1/kernel/ztdummy.ko > > make[2]: Leaving directory >`/usr/src/kernels/2.6.9-78.0.13.EL-smp-i686' > > gcc -c -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE >-DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o >zonedata.lo > zonedata.c > > gcc -c -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE >-DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o >tonezone.lo > tonezone.c > > gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE >-DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" >-shared -Wl,-sonam > e,libtonezone.so.1.0 -o libtonezone.so >zonedata.lo tonezone.lo -lm > > gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE >-DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c >-o zonedata.o > zonedata.c > > gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE >-DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c >-o tonezone.o > tonezone.c > > ar rcs libtonezone.a zonedata.o tonezone.o > > ranlib libtonezone.a > > gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE >-DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o >fxotune.o -c fx > otune.c > > gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE >-DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o >fxotune fxotune > .o -lm > > gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE >-DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o >ztcfg.o -c ztcf > g.c > > gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE >-DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o >ztcfg ztcfg.o l > ibtonezone.a -lm > > gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE >-DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o >ztmonitor.o -c > ztmonitor.c > > gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE >-DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o >ztmonitor ztmon > itor.o > > gcc -o ztspeed.o -c ztspeed.c > > gcc -o ztspeed ztspeed.o > > gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE >-DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o >zttest.o -c ztt > est.c > > gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE >-DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o >zttest zttest.o > > > gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE >-DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o >ztscan.o -c zts > can.c > > gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE >-DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o >ztscan ztscan.o > > > gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE >-DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o >zttool.o -c zt > tool.c > > gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE >-DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o >zttool zttool.o > -lnewt > > make[1]: Leaving directory `/usr/src/zaptel-1.4.12.1' > > ----------------- end output of make command ------------------- > > > > > > # make install > > -------------- output of make install command -------------- > > [r...@localhost zaptel-1.4.12.1]# make install > > make[1]: Entering directory `/usr/src/zaptel-1.4.12.1' > > make -C /usr/src/linux-2.4 ARCH=i386 >SUBDIRS=/usr/src/zaptel-1.4.12.1/kernel HOTPLUG_FIRMWARE=yes >KBUILD_OBJ_M="zaptel.o ztdummy.o " modules > > make[2]: Entering directory >`/usr/src/kernels/2.6.9-78.0.13.EL-smp-i686' > > Building modules, stage 2. > > MODPOST > > make[2]: Leaving directory >`/usr/src/kernels/2.6.9-78.0.13.EL-smp-i686' > > make[1]: Leaving directory `/usr/src/zaptel-1.4.12.1' > > install -d /etc/udev/rules.d > > build_tools/genudevrules > /etc/udev/rules.d/zaptel.rules > > build_tools/uninstall-modules dahdi 2.6.9-78.ELsmp > > make -C /usr/src/linux-2.4 ARCH=i386 >SUBDIRS=/usr/src/zaptel-1.4.12.1/kernel HOTPLUG_FIRMWARE=yes >KBUILD_OBJ_M="zaptel.o ztdummy.o " INSTALL_MOD_PATH= >INSTALL_MOD_DIR=misc modules_install > > make[1]: Entering directory >`/usr/src/kernels/2.6.9-78.0.13.EL-smp-i686' > > INSTALL /usr/src/zaptel-1.4.12.1/kernel/zaptel.ko > > INSTALL /usr/src/zaptel-1.4.12.1/kernel/ztdummy.ko > > make[1]: Leaving directory >`/usr/src/kernels/2.6.9-78.0.13.EL-smp-i686' > > [ `id -u` = 0 ] && /sbin/depmod -a 2.6.9-78.ELsmp || : > > install -d /sbin > > install fxotune ztcfg ztmonitor ztspeed zttest ztscan zttool /sbin/ > > install -d /usr/share/man/man8 > > install -m 644 doc/fxotune.8 doc/ztcfg.8 doc/ztmonitor.8 >doc/ztspeed.8 doc/zttest.8 doc/ztscan.8 doc/zttool.8 >/usr/share/man/man8/ > > /usr/bin/install -c -D -m 755 libtonezone.a /usr/lib/libtonezone.a > > /usr/bin/install -c -D -m 755 libtonezone.so >/usr/lib/libtonezone.so.1.0 > > if [ `id -u` = 0 ]; then \ > > /sbin/ldconfig || : ;\ > > fi > > rm -f /usr/liblibtonezone.so > > /bin/ln -sf libtonezone.so.1.0 \ > > /usr/lib/libtonezone.so.1 > > /bin/ln -sf libtonezone.so.1.0 \ > > /usr/lib/libtonezone.so > > /sbin/restorecon -v /usr/lib/libtonezone.so > > /usr/bin/install -c -D -m 644 kernel/zaptel.h >/usr/include/zaptel/zaptel.h > > /usr/bin/install -c -D -m 644 tonezone.h >/usr/include/zaptel/tonezone.h > > make -C firmware hotplug-install DESTDIR= HOTPLUG_FIRMWARE=yes > > make[1]: Entering directory `/usr/src/zaptel-1.4.12.1/firmware' > > make[1]: Nothing to be done for `hotplug-install'. > > make[1]: Leaving directory `/usr/src/zaptel-1.4.12.1/firmware' > > ################################################### > > ### > > ### Zaptel installed successfully. > > ### If you have not done so before, install init scripts with: > > ### > > ### make config > > ### > > ################################################### > > [r...@localhost zaptel-1.4.12.1]# > > -------------- end output of make install command -------------- > > # make config > > -------------- output of make config command -------------- > > [r...@localhost zaptel-1.4.12.1]# make config > > install -D zaptel.init /etc/rc.d/init.d/zaptel > > install -D ifup-hdlc /etc/sysconfig/network-scripts/ifup-hdlc > > /sbin/chkconfig --add zaptel > > Zaptel has been configured. > > > > If you have any zaptel hardware it is now recommended to > > edit /etc/default/zaptel or /etc/sysconfig/zaptel and set there an > > optimal value for the variable MODULES . > > > > I think that the zaptel hardware you have on your system is: > > [r...@localhost zaptel-1.4.12.1]# > > -------------- end output of make config command -------------- > > > > I rebooted the server with command: > > #init 6 > > > > Server reboots and I see these same errors: > > > May 18 14:46:59 localhost modprobe: FATAL: Module zaptel >not found. > > > May 18 14:46:59 localhost zaptel: Loading zaptel >framework: failed > > > On boot I also see "Waiting for zap to come >online...Error: missing /dev/zap! > > > > > > > > > >on Monday 05/18/2009 Jimmy Ezell([email protected]) wrote > > > > > > > > > > > > > >I would modprobe ztdummy and see what happens and look at > > >the log and > > > > >lsmod after you do that. > > > > > > > > > >-- > > > > >Your life is like a penny. You're going to lose it. The > > >question is: > > > > >How do > > > > >you spend it? > > > > > > > > > > John Covici > > > > > [email protected] > > > > > > > > John, > > > > > > > > modprobe comes back right away with ztdummy not found > > > > > > > > [r...@localhost zaptel-1.4.12.1]# modprobe ztdummy > > > > FATAL: Module ztdummy not found. > > > > > > > > > > > > > > > > > _______________________________________________ > > > > -- Bandwidth and Colocation Provided by > > >http://www.api-digital.com -- > > > > > > > > asterisk-users mailing > > >list > > > > To UNSUBSCRIBE or update options visit: > > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > >-- > > >Your life is like a penny. You're going to lose it. The >question is: > > >How do > > >you spend it? > > > > > > John Covici > > > [email protected] > > > > > >_______________________________________________ > > >-- Bandwidth and Colocation Provided by >http://www.api-digital.com -- > > > > > >asterisk-users mailing >list > > >To UNSUBSCRIBE or update options visit: > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > > _______________________________________________ > > -- Bandwidth and Colocation Provided by >http://www.api-digital.com -- > > > > asterisk-users mailing >list > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > >-- >Your life is like a penny. You're going to lose it. The question is: >How do >you spend it? > > John Covici > [email protected] > >_______________________________________________ >-- Bandwidth and Colocation Provided by http://www.api-digital.com -- > >asterisk-users mailing list >To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
