Dave Fullerton wrote: >> The dahdi_scan tool will tell you whether hardware echocans are present >> or not, among other methods. >> > > I tried that, but I didn't see anything that specified whether the echo > canceller was present. Here's the output, can you tell me what I should > be looking for? > > r...@srv210394:~# dahdi_scan > [1] > active=yes > alarms=OK > description=T2XXP (PCI) Card 0 Span 1 > name=TE2/0/1 > manufacturer=Digium > devicetype=Wildcard TE220 (4th Gen)
It would show up in the 'devicetype' line, which should end with 'with VPM400M', 'with VPMOCT064' or 'with VPMOCT128' in the case of a dual/quad span card, depending on which module is attached. -- Kevin P. Fleming Digium, Inc. | Director of Software Technologies 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA skype: kpfleming | jabber: kpflem...@digium.com Check us out at www.digium.com & www.asterisk.org _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2009 - October 13 - 15 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
