Kevin P. Fleming wrote: > Dave Fullerton wrote: > >>> The dahdi_scan tool will tell you whether hardware echocans are present >>> or not, among other methods. >>> >> I tried that, but I didn't see anything that specified whether the echo >> canceller was present. Here's the output, can you tell me what I should >> be looking for? >> >> r...@srv210394:~# dahdi_scan >> [1] >> active=yes >> alarms=OK >> description=T2XXP (PCI) Card 0 Span 1 >> name=TE2/0/1 >> manufacturer=Digium >> devicetype=Wildcard TE220 (4th Gen) > > It would show up in the 'devicetype' line, which should end with 'with > VPM400M', 'with VPMOCT064' or 'with VPMOCT128' in the case of a > dual/quad span card, depending on which module is attached. >
I guess I just found a bug then, because the card above is a TE220B. Here's a portion of the dmesg output: wct4xxp 0000:02:08.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Found TE2XXP at base address dfcfff80, remapped to f8872f80 TE2XXP version c01a016c, burst ON Octasic optimized! FALC version: 00000005, Board ID: 00 Reg 0: 0x35b55400 Reg 1: 0x35b55000 Reg 2: 0x00000000 Reg 3: 0x00000000 Reg 4: 0x0000ff01 Reg 5: 0x00000000 Reg 6: 0xc01a016c Reg 7: 0x00001000 Reg 8: 0x00000000 Reg 9: 0x00ff00ff Reg 10: 0x0000004a TE2XXP: Launching card: 0 TE2XXP: Setting up global serial parameters Found a Wildcard: Wildcard TE220 (4th Gen) About to enter spanconfig! Done with spanconfig! dahdi: Registered tone zone 0 (United States / North America) About to enter startup! TE2XXP: Span 1 configured for ESF/B8ZS wct2xxp: Setting yellow alarm on span 1 timing source auto card 0! VPM400: Not Present timing source auto card 0! firmware: requesting dahdi-fw-oct6114-064.bin VPM450: echo cancellation for 64 channels VPM450: hardware DTMF disabled. VPM450: Present and operational servicing 2 span(s) Completed startup! -Dave _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2009 - October 13 - 15 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users