* -----Original Message----- * From: Todd Reese <trees...@gmail.com> * Reply-to: Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-users@lists.digium.com> * To: asterisk-users@lists.digium.com * Subject: [asterisk-users] Dahdi install gone wrong * Date: Mon, 23 Aug 2010 10:26:58 -0400 * * Hi All, * * * I've got a project installing a Digium TDM800P card with 8 FXO's in an * Asterisk box. * * * The computer is running Slackware 13.1 and I've installed the current * Dahdi and Asterisk 1.6.2.11. * * * I've installed several boxes that are pure VOIP but, I haven't installed * a Dahdi interface and I'm stumped. I've got it to the point of Dahdi * seeing the card and Asterisk recognizing dahdi but, I can't see any * channels for the calls to come in on. * * I've had to borrow files from an old config of Trixbox (the machine was * underpowered) to get to the point where I am in my setup. * * I would like to inquire some help from the group to get me up and * receiving calls on the card. * * * Regards, * * Todd Reese * * Include: * * * ============chan_dahdi.conf========== * * * ; Configuration file * * [trunkgroups] * * [channels] * * language=en * context=from-zaptel * signalling=fxs_ks * rxwink=300 ; Atlas seems to use long (250ms) winks * ; * ; Whether or not to do distinctive ring detection on FXO lines * ; * ;usedistinctiveringdetection=yes * * usecallerid=yes * hidecallerid=no * callwaiting=yes * usecallingpres=yes * callwaitingcallerid=yes * threewaycalling=yes * transfer=yes * cancallforward=yes * callreturn=yes * echocancel=yes * echocancelwhenbridged=no * ;echotraining=800 * rxgain=0.0 * txgain=0.0 * group=0 * callgroup=1 * pickupgroup=1 * immediate=no * * ;faxdetect=both * faxdetect=incoming * ;faxdetect=outgoing * ;faxdetect=no * * ;Include setup-pstn configs * #include dahdi-channels.conf * * group=1 * * ;Include PBXconfig configs * #include chan_dahdi_additional.conf * * * * ============dahdi-channels.conf============= * * ; Autogenerated by /usr/sbin/dahdi_genconf on Wed Aug 18 20:25:02 2010 * ; If you edit this file and execute /usr/sbin/dahdi_genconf again, * ; your manual changes will be LOST. * ; Dahdi Channels Configurations (chan_dahdi.conf) * ; * ; This is not intended to be a complete chan_dahdi.conf. Rather, it is * intended * ; to be #include-d by /etc/chan_dahdi.conf that will include the global * settings * ; * * ; Span 1: WCTDM/0 "Wildcard TDM800P Board 1" (MASTER) * ;;; line="1 WCTDM/0/0 FXSKS (SWEC: MG2)" * signalling=fxs_ks * callerid=asreceived * group=0 * context=from-pstn * channel => 1 * callerid= * group= * context=default * * ;;; line="2 WCTDM/0/1 FXSKS (SWEC: MG2)" * signalling=fxs_ks * callerid=asreceived * group=0 * context=from-pstn * channel => 2 * callerid= * group= * context=default * * ;;; line="3 WCTDM/0/2 FXSKS (SWEC: MG2)" * signalling=fxs_ks * callerid=asreceived * group=0 * context=from-pstn * channel => 3 * callerid= * group= * context=default * * ;;; line="4 WCTDM/0/3 FXSKS (SWEC: MG2)" * signalling=fxs_ks * callerid=asreceived * group=0 * context=from-pstn * channel => 4 * callerid= * group= * context=default * * ;;; line="5 WCTDM/0/4 FXSKS (SWEC: MG2)" * signalling=fxs_ks * callerid=asreceived * group=0 * context=from-pstn * channel => 5 * callerid= * group= * context=default * * ;;; line="6 WCTDM/0/5 FXSKS (SWEC: MG2)" * signalling=fxs_ks * callerid=asreceived * group=0 * context=from-pstn * channel => 6 * callerid= * group= * context=default * * ;;; line="7 WCTDM/0/6 FXSKS (SWEC: MG2)" * signalling=fxs_ks * callerid=asreceived * group=0 * context=from-pstn * channel => 7 * callerid= * group= * context=default * * ;;; line="8 WCTDM/0/7 FXSKS (SWEC: MG2)" * signalling=fxs_ks * callerid=asreceived * group=0 * context=from-pstn * channel => 8 * callerid= * group= * context=default * * * =====system.conf============= * * * # Autogenerated by /usr/sbin/dahdi_genconf on Sun Aug 22 19:34:02 2010 * # If you edit this file and execute /usr/sbin/dahdi_genconf again, * # your manual changes will be LOST. * # Dahdi Configuration File * # * # This file is parsed by the Dahdi Configurator, dahdi_cfg * # * # Global data * * loadzone = us * defaultzone = us * * # Span 1: WCTDM/0 "Wildcard TDM800P Board 1" (MASTER) * fxsks=1 * #echocanceller=mg2,1 * fxsks=2 * #echocanceller=mg2,2 * fxsks=3 * #echocanceller=mg2,3 * fxsks=4 * #echocanceller=mg2,4 * fxsks=5 * #echocanceller=mg2,5 * fxsks=6 * #echocanceller=mg2,6 * fxsks=7 * #echocanceller=mg2,7 * fxsks=8 * #echocanceller=mg2,8
Can you include the germane part of the dialplan also? -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users