Hi,
astrisks*CLI>* module unload chan_dahdi.so* Unable to unload resource chan_dahdi.so Command 'module unload chan_dahdi.so ' failed. Producing some other error messages !!!!! On Thu, Oct 6, 2011 at 9:17 PM, Eric Wieling <[email protected]> wrote: > In the Asterisk CLI run the commands "module unload chan_dahdi.so" and > "module load chan_dahdi.so". > > > > -----Original Message----- > From: [email protected] [mailto: > [email protected]] On Behalf Of michael k > Sent: Thursday, October 06, 2011 11:40 AM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [asterisk-users] dahdi show status command not avilable in CLI > > Hi, > > I was run the commands "dahdi_genconf" and dahdi_cfg outside the CLI > as the part of x100p card installation. Before issuing this command the > dahdi show status command was available. There may any issues ? > > > Michael.k > > > > On Thu, Oct 6, 2011 at 8:59 PM, gincantalupo <[email protected]> > wrote: > > > > Hi Michael, > > what if you reload the module chan_dahdi from within the * CLI? It > should give some hints..... > > Giorgio > > > > On 10/06/2011 05:22 PM, michael k wrote: > > Hi Giorgio, > > Thanks for your reply. I will produce some output for your > reference. > > # lsmod | grep dahdi > > dahdi_echocan_mg2 39688 1 > dahdi_transcode 42372 1 wctc4xxp > dahdi_voicebus 79424 2 wctdm24xxp,wcte12xp > dahdi 238384 14 > dahdi_echocan_mg2,xpp,dahdi_transcode,wcb4xxp,wctdm,wcfxo,wctdm24xxp,wcte11xp,wct1xxp,wcte12xp,dahdi_voicebus,wct4xxp > crc_ccitt 35265 2 wctdm24xxp,dahdi > > > # service dahdi status > > ### Span 1: WCFXO/0 "Wildcard X100P Board 1" (MASTER) > 1 FXO FXSKS (SWEC: MG2) (battery) > > > # dahdi_cfg -vv > > DAHDI Tools Version - 2.3.0 > > DAHDI Version: 2.3.0.1 > Echo Canceller(s): MG2 > Configuration > ====================== > > Channel map: > > Channel 01: FXS Kewlstart (Default) (Echo Canceler: mg2) > (Slaves: 01) > > 1 channels to configure. > > Setting echocan for channel 1 to mg2 > > > # dahdi_scan > > [1] > active=yes > alarms=OK > description=Wildcard X100P Board 1 > name=WCFXO/0 > manufacturer=Digium > devicetype=Wildcard X100P > location=PCI Bus 02 Slot 02 > basechan=1 > totchans=1 > irq=193 > type=analog > port=1,FXO > > > These outputs shows that the modules are loaded correctly. > Any other clues ? > > Michael.k > > > > On Thu, Oct 6, 2011 at 8:43 PM, gincantalupo < > [email protected]> wrote: > > > Hi Michael, > > if you type "dah" followed by TAB and nothing > appears, it means you do not have dahdi module loaded or dahdi_cfg > application not launched before starting asterisk. > > Giorgio > > > On 10/06/2011 04:57 PM, michael k wrote: > > Hi All, > > I have installed asteriskNow with > Asterisk 1.6.2.11 and FreePBX 2.7.0.10. I have configured x100p fxo card in > my asterisk box. But in my cli mode i am not getting the command "dahdi > show status" > > > Output of CLI : > > astrisks*CLI> dahdi show status > No such command 'dahdi show status' (type > 'core show help dahdi show' for other possible commands) > > > I really not understand why this command is > not avilable in CLI mode. Please help me to resolve this issue > > > Michael.k > > > -- > > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by > http://www.api-digital.com -- > New to Asterisk? Join us for a live > introductory webinar every Thurs: > > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > -- > > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by > http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory > webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > -- > > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by > http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar > every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > -- > > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com-- > New to Asterisk? Join us for a live introductory webinar every > Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
