*[root@astrisks ~]# cat /etc/asterisk/dahdi-channels.conf*
; Autogenerated by /usr/sbin/dahdi_genconf on Thu Oct 6 18:28:14 2011 ; If you edit this file and execute /usr/sbin/dahdi_genconf again, ; your manual changes will be LOST. ; Dahdi Channels Configurations (chan_dahdi.conf) ; ; This is not intended to be a complete chan_dahdi.conf. Rather, it is intended ; to be #include-d by /etc/chan_dahdi.conf that will include the global settings ; ; Span 1: WCFXO/0 "Wildcard X100P Board 1" (MASTER) ;;; line="1 WCFXO/0/0 FXSLS (In use)" signalling=fxs_ks callerid=asreceived group=0 context=from-pstn channel => 1 callerid= group= context=default *[root@astrisks ~]# cat /etc/asterisk/chan_dahdi_additional.conf* ;--------------------------------------------------------------------------------; ; Do NOT edit this file as it is auto-generated by FreePBX. All modifications to ; ; this file must be done via the web gui. There are alternative files to make ; ; custom modifications, details at: http://freepbx.org/configuration_files ; ;--------------------------------------------------------------------------------; ; * [root@astrisks ~]# cat /etc/asterisk/chan_dahdi_groups.conf* ;--------------------------------------------------------------------------------; ; Do NOT edit this file as it is auto-generated by FreePBX. All modifications to ; ; this file must be done via the web gui. There are alternative files to make ; ; custom modifications, details at: http://freepbx.org/configuration_files ; ;--------------------------------------------------------------------------------; ; signalling=fxs_ls context=from-analog On Fri, Oct 7, 2011 at 11:11 PM, Sammy Govind <[email protected]> wrote: > Please paste the configurations in the #included files as well. > > > On Fri, Oct 7, 2011 at 7:07 PM, michael k <[email protected]> wrote: > >> Hi, >> >> >> This is my /etc/asterisk/chan_dahdi.conf file. >> >> >> [root@astrisks asterisk]# cat /etc/asterisk/chan_dahdi.conf >> ; Copied from DAHDI Module of FreePBX >> >> [general] >> >> #include chan_dahdi_general.conf >> >> [channels] >> >> ; include dahdi groups defined by DAHDI module of FreePBX >> #include chan_dahdi_groups.conf >> >> ;added by mic 06-oct-20011 >> #include /etc/asterisk/dahdi-channels.conf >> >> ; include dahdi extensions defined in FreePBX >> #include chan_dahdi_additional.conf >> >> >> Any issues in this ? >> >> Michael.k >> >> >> >> On Fri, Oct 7, 2011 at 7:19 PM, Eric Wieling <[email protected]> wrote: >> >>> It is likely you have an error in your /etc/asterisk/chan_dahdi.conf >>> >>> -----Original Message----- >>> From: [email protected] [mailto: >>> [email protected]] On Behalf Of michael k >>> Sent: Friday, October 07, 2011 9:24 AM >>> To: Asterisk Users Mailing List - Non-Commercial Discussion >>> Subject: Re: [asterisk-users] dahdi show status command not avilable in >>> CLI >>> >>> Hi, >>> >>> I am getting this error message while executing the "module load >>> chan_dahdi.so". >>> >>> astrisks*CLI> module load chan_dahdi.so >>> >>> Unable to load module chan_dahdi.so >>> Command 'module load chan_dahdi.so' failed. >>> == Parsing '/etc/asterisk/chan_dahdi.conf': == Found >>> == Parsing '/etc/asterisk/chan_dahdi_general.conf': == Found >>> == Parsing '/etc/asterisk/chan_dahdi_groups.conf': == Found >>> == Parsing '/etc/asterisk/dahdi-channels.conf': == Found >>> == Parsing '/etc/asterisk/chan_dahdi_additional.conf': == Found >>> >>> >>> Thanks, >>> >>> Michael.k >>> >>> >>> >>> On Thu, Oct 6, 2011 at 9:44 PM, Eric Wieling <[email protected]> wrote: >>> >>> >>> What happens when you do the module load chan_dahdi.so command? >>> >>> >>> -----Original Message----- >>> From: [email protected] [mailto: >>> [email protected]] On Behalf Of michael k >>> >>> Sent: Thursday, October 06, 2011 12:10 PM >>> To: Asterisk Users Mailing List - Non-Commercial Discussion >>> Subject: Re: [asterisk-users] dahdi show status command not >>> avilable in CLI >>> >>> Hi, >>> >>> >>> astrisks*CLI> module unload chan_dahdi.so >>> >>> Unable to unload resource chan_dahdi.so >>> Command 'module unload chan_dahdi.so ' failed. >>> >>> Producing some other error messages !!!!! >>> >>> >>> On Thu, Oct 6, 2011 at 9:17 PM, Eric Wieling <[email protected]> >>> wrote: >>> >>> >>> In the Asterisk CLI run the commands "module unload >>> chan_dahdi.so" and "module load chan_dahdi.so". >>> >>> >>> >>> >>> -----Original Message----- >>> From: [email protected] [mailto: >>> [email protected]] On Behalf Of michael k >>> Sent: Thursday, October 06, 2011 11:40 AM >>> To: Asterisk Users Mailing List - Non-Commercial Discussion >>> Subject: Re: [asterisk-users] dahdi show status command not >>> avilable in CLI >>> >>> Hi, >>> >>> I was run the commands "dahdi_genconf" and dahdi_cfg >>> outside the CLI as the part of x100p card installation. Before issuing this >>> command the dahdi show status command was available. There may any issues ? >>> >>> >>> Michael.k >>> >>> >>> >>> On Thu, Oct 6, 2011 at 8:59 PM, gincantalupo < >>> [email protected]> wrote: >>> >>> >>> >>> Hi Michael, >>> >>> what if you reload the module chan_dahdi from within >>> the * CLI? It should give some hints..... >>> >>> Giorgio >>> >>> >>> >>> On 10/06/2011 05:22 PM, michael k wrote: >>> >>> Hi Giorgio, >>> >>> Thanks for your reply. I will produce some >>> output for your reference. >>> >>> # lsmod | grep dahdi >>> >>> dahdi_echocan_mg2 39688 1 >>> dahdi_transcode 42372 1 wctc4xxp >>> dahdi_voicebus 79424 2 >>> wctdm24xxp,wcte12xp >>> dahdi 238384 14 >>> dahdi_echocan_mg2,xpp,dahdi_transcode,wcb4xxp,wctdm,wcfxo,wctdm24xxp,wcte11xp,wct1xxp,wcte12xp,dahdi_voicebus,wct4xxp >>> crc_ccitt 35265 2 >>> wctdm24xxp,dahdi >>> >>> >>> # service dahdi status >>> >>> ### Span 1: WCFXO/0 "Wildcard X100P Board >>> 1" (MASTER) >>> 1 FXO FXSKS (SWEC: MG2) >>> (battery) >>> >>> >>> # dahdi_cfg -vv >>> >>> DAHDI Tools Version - 2.3.0 >>> >>> DAHDI Version: 2.3.0.1 >>> Echo Canceller(s): MG2 >>> Configuration >>> ====================== >>> >>> Channel map: >>> >>> Channel 01: FXS Kewlstart (Default) (Echo >>> Canceler: mg2) (Slaves: 01) >>> >>> 1 channels to configure. >>> >>> Setting echocan for channel 1 to mg2 >>> >>> >>> # dahdi_scan >>> >>> [1] >>> active=yes >>> alarms=OK >>> description=Wildcard X100P Board 1 >>> name=WCFXO/0 >>> manufacturer=Digium >>> devicetype=Wildcard X100P >>> location=PCI Bus 02 Slot 02 >>> basechan=1 >>> totchans=1 >>> irq=193 >>> type=analog >>> port=1,FXO >>> >>> >>> These outputs shows that the modules are >>> loaded correctly. Any other clues ? >>> >>> Michael.k >>> >>> >>> >>> On Thu, Oct 6, 2011 at 8:43 PM, gincantalupo >>> <[email protected]> wrote: >>> >>> >>> Hi Michael, >>> >>> if you type "dah" followed by TAB >>> and nothing appears, it means you do not have dahdi module loaded or >>> dahdi_cfg application not launched before starting asterisk. >>> >>> Giorgio >>> >>> >>> On 10/06/2011 04:57 PM, michael k >>> wrote: >>> >>> Hi All, >>> >>> I have installed >>> asteriskNow with Asterisk 1.6.2.11 and FreePBX 2.7.0.10. I have configured >>> x100p fxo card in my asterisk box. But in my cli mode i am not getting the >>> command "dahdi show status" >>> >>> >>> Output of CLI : >>> >>> astrisks*CLI> dahdi show >>> status >>> No such command 'dahdi show >>> status' (type 'core show help dahdi show' for other possible commands) >>> >>> >>> I really not understand why >>> this command is not avilable in CLI mode. Please help me to resolve this >>> issue >>> >>> >>> Michael.k >>> >>> >>> -- >>> >>> _____________________________________________________________________ >>> -- Bandwidth and Colocation >>> Provided by http://www.api-digital.com -- >>> New to Asterisk? Join us for >>> a live introductory webinar every Thurs: >>> >>> http://www.asterisk.org/hello >>> >>> asterisk-users mailing list >>> To UNSUBSCRIBE or update >>> options visit: >>> >>> http://lists.digium.com/mailman/listinfo/asterisk-users >>> >>> >>> >>> -- >>> >>> _____________________________________________________________________ >>> -- Bandwidth and Colocation Provided >>> by http://www.api-digital.com -- >>> New to Asterisk? Join us for a live >>> introductory webinar every Thurs: >>> >>> http://www.asterisk.org/hello >>> >>> asterisk-users mailing list >>> To UNSUBSCRIBE or update options >>> visit: >>> >>> http://lists.digium.com/mailman/listinfo/asterisk-users >>> >>> >>> >>> >>> -- >>> >>> _____________________________________________________________________ >>> -- Bandwidth and Colocation Provided by >>> http://www.api-digital.com -- >>> New to Asterisk? Join us for a live >>> introductory webinar every Thurs: >>> >>> http://www.asterisk.org/hello >>> >>> asterisk-users mailing list >>> To UNSUBSCRIBE or update options visit: >>> >>> http://lists.digium.com/mailman/listinfo/asterisk-users >>> >>> >>> >>> -- >>> >>> _____________________________________________________________________ >>> -- Bandwidth and Colocation Provided by >>> http://www.api-digital.com -- >>> New to Asterisk? Join us for a live introductory >>> webinar every Thurs: >>> http://www.asterisk.org/hello >>> >>> asterisk-users mailing list >>> To UNSUBSCRIBE or update options visit: >>> >>> http://lists.digium.com/mailman/listinfo/asterisk-users >>> >>> >>> >>> >>> -- >>> >>> _____________________________________________________________________ >>> -- Bandwidth and Colocation Provided by >>> http://www.api-digital.com -- >>> New to Asterisk? Join us for a live introductory webinar >>> every Thurs: >>> http://www.asterisk.org/hello >>> >>> asterisk-users mailing list >>> To UNSUBSCRIBE or update options visit: >>> http://lists.digium.com/mailman/listinfo/asterisk-users >>> >>> >>> >>> >>> -- >>> >>> _____________________________________________________________________ >>> -- Bandwidth and Colocation Provided by >>> http://www.api-digital.com -- >>> New to Asterisk? Join us for a live introductory webinar every >>> Thurs: >>> http://www.asterisk.org/hello >>> >>> asterisk-users mailing list >>> To UNSUBSCRIBE or update options visit: >>> http://lists.digium.com/mailman/listinfo/asterisk-users >>> >>> >>> >>> >>> -- >>> _____________________________________________________________________ >>> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >>> New to Asterisk? Join us for a live introductory webinar every Thurs: >>> http://www.asterisk.org/hello >>> >>> asterisk-users mailing list >>> To UNSUBSCRIBE or update options visit: >>> http://lists.digium.com/mailman/listinfo/asterisk-users >>> >> >> >> -- >> _____________________________________________________________________ >> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >> New to Asterisk? Join us for a live introductory webinar every Thurs: >> http://www.asterisk.org/hello >> >> asterisk-users mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users >> > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
