On 09/25/2013 09:22 AM, Endri Stefani wrote:
Hi
Greeting to all you out there.
I am new at asterisk, I have been working with PLMN platforms
telecommunication for 5 years with NSN and Huawei.
We have recently built an asterisk PBX with Trixbox and connected it to
our MSS using Digium E1 cards(ISDN). Everything went smoothly as there
are tons of information out there, except for the TON number.
If you have worked in Telecommunication you will know the importance of
TON flexibility.
All the posts online suggested to update under Chan_dahdi.conf:
pridialplan = international
prilocaldialplan = international
or other TON value ,restart the platform and then trixbox1*CLI> dialplan
reload
I have already done this with no success. Are there other changes I have
to make in order to change dialplan?
Afaik the Trixbox Community Edition is no longer developed. So unless
you use a commercial Trixbox you are perhaps better off with just the
latest stable Asterisk (asterisk 11.5.1 or 11.6.0-rc1, dahdi 2.7.0.1,
libpri 1.4.14, libss7 1.0.2) or if you need a GUI have a look at
Elastix, the FreePBX distro, etc.
Regards,
Patrick
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
