Hi Steve, There are no errors I need to be able to change TON(below my PRI debug ) in international or subscriber. The change in chan_dahdi.conf did not do it
> Calling Number (len= 8) [ Ext: 0 TON: National Number (2) NPI: > ISDN/Telephony Numbering Plan (E.164/E.163) (1) > Presentation: Presentation permitted, user number > not screened (0) '1000' ] > [70 0c a1 30 30 36 36 39 31 31 30 30 30 30] > Called Number (len=14) [ Ext: 1 TON: National Number (2) NPI: > ISDN/Telephony Numbering Plan (E.164/E.163) (1) 'xxxxxx' ] Br From: [email protected] [mailto:[email protected]] On Behalf Of Steve Totaro Sent: Wednesday, September 25, 2013 4:24 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Asterisk TON number I asked you before. What exactly are you trying to do that you cannot? It helps to be fairly detailed when asking a question to the list. Include error messages if you have any. The dialplan and your ISDN configs are different things. It sounds like maybe you are having issues with with your dailplan and pattern matching. You can probably do all of that from the Trixbox GUI. If you like Trixbox, check out FreePBX since Trixbox is done. Thanks, Steve Totaro On Wed, Sep 25, 2013 at 9:30 AM, Endri Stefani <[email protected]<mailto:[email protected]>> wrote: Hi guys Thanks a lot, I am just getting used to it, my telco managers :) don't trust stability for open source solution for voice(you give a headache to calling parties if lag is more than 250ms :) ) and I want to prove them wrong. I have successfully integrated * with our system via ISDN and first calls look fast and clear but it is required to be flexible with TON number in order to be used. I tried unloading and loading chan-dahdi.conf like Hans suggested with no success TON was not changed. Here is my chan_dahdi.conf, is there anything else I should do in order for new pridailplan came into action : ; ; DAHDI telephony ; ; Configuration file [trunkgroups] [channels] switchtype = qsig context = pri_incoming group = 0 signalling = pri_cpe channel => 1-15,17-31 ;language=en ;context=from-zaptel ;signalling=fxs_ks ;rxwink=300 ; ; Whether or not to do distinctive ring detection on FXO lines ; ;usedistinctiveringdetection=yes usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=no echotraining=400 rxgain=0.0 txgain=0.0 group=0 callgroup=1 pickupgroup=1 immediate=no ;faxdetect=both faxdetect=incoming ;faxdetect=outgoing ;faxdetect=no ;Include setup-pstn configs #include dahdi-channels.conf group=1 ;Include PBXconfig configs #include chan_dahdi_additional.conf unknown: Unknown private: Private ISDN local: Local ISDN national: National ISDN international: International ISDN dynamic: Dynamically selects the appropriate dialplan redundant: Same as dynamic, except that the underlying number is not changed (not common) pridialplan = international prilocaldialplan = international From: [email protected]<mailto:[email protected]> [mailto:[email protected]<mailto:[email protected]>] On Behalf Of $$ dave cantera (android asus) Sent: Wednesday, September 25, 2013 2:46 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Asterisk TON number if you are a serious teleco guy, which it seems you are. you might consider dumping trixbox in the near future. while trixbox does provide a good entry level into the * world, there are limitations that will eventually hold you back from enjoying the full breadth of utility that * offers. food for thought, Dave Cantera (856)813-7098<tel:%28856%29813-7098> mobile/txt [email protected]<mailto:[email protected]> Sent from my ASUS Pad Steve Totaro <[email protected]<mailto:[email protected]>> wrote: On Wed, Sep 25, 2013 at 3:22 AM, Endri Stefani <[email protected]<mailto:[email protected]>> wrote: Hi Greeting to all you out there. I am new at asterisk, I have been working with PLMN platforms telecommunication for 5 years with NSN and Huawei. We have recently built an asterisk PBX with Trixbox and connected it to our MSS using Digium E1 cards(ISDN). Everything went smoothly as there are tons of information out there, except for the TON number. If you have worked in Telecommunication you will know the importance of TON flexibility. All the posts online suggested to update under Chan_dahdi.conf: pridialplan = international prilocaldialplan = international or other TON value ,restart the platform and then trixbox1*CLI> dialplan reload I have already done this with no success. Are there other changes I have to make in order to change dialplan? Br So what are you trying to do specifically? Thanks, Steve Totaro -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
