On 2013-09-25 09:22, Endri Stefani wrote:
Hi
Greeting to all you out there.
I am new at asterisk, I have been working with PLMN platforms telecommunication
for 5 years with NSN and Huawei.
We have recently built an asterisk PBX with Trixbox and connected it to our MSS
using Digium E1 cards(ISDN). Everything went smoothly as there are tons of
information out there, except for the TON number.
If you have worked in Telecommunication you will know the importance of TON
flexibility.
All the posts online suggested to update under Chan_dahdi.conf:
pridialplan = international
prilocaldialplan = international
or other TON value ,restart the platform and then trixbox1*CLI> dialplan reload
I have already done this with no success. Are there other changes I have to
make in order to change dialplan?
If you change something in chan_dahdi.conf, 'dialplan reload' wont help.
You need to reload chan_dahdi. I 'm not quite sure if 'module reload
chan_dahdi' reloads the
TON settings.
But you should be save by: module unload chan_dahdi.so and module load
chan_dahdi.so
which completly unloads and loads chan_dahdi.
Regards
Hans
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
