On Monday 27 January 2014, Fernando Pizarro wrote: > Hi all! > > I'm new with telephony cards and DAHDI drivers. I have installed > Asterisk NOW 3.0.0 and update to Asterisk 11.7.0, modules are update too. > > I'm following the installation guide of Atcom [1] for AX1600P analogic > card, modules are loaded > > [root@pbx ~]# lsmod | grep -E "hisax|netjet|dahdi" > netjet 14618 0 > isdnhdlc 4523 1 netjet > mISDNipac 33989 1 netjet > mISDN_core 73118 3 netjet,mISDNipac > hisax 410162 0 > isdn 119265 1 hisax > dahdi_transcode 5240 1 wctc4xxp > dahdi_voicebus 49368 2 wctdm24xxp,wcte12xp > dahdi 207790 15 > xpp,dahdi_transcode,wcb4xxp,wctdm,wcfxo,wcaxx,wctdm24xxp,wcte11xp,wct1xxp,w > cte13xp,wcte12xp,dahdi_voicebus,wcte43x,wct4xxp,oct612x crc_ccitt > 1369 4 isdnhdlc,hisax,wctdm24xxp,dahdi > > and there is the output of lspci command: > > [root@pbx ~]# lspci -vvvvvv -s 02:03.0 > 02:03.0 Communication controller: Tiger Jet Network Inc. Tiger3XX > Modem/ISDN interface > Subsystem: Device b300:0003 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium > > >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > > Latency: 32 (250ns min, 32000ns max) > Interrupt: pin A routed to IRQ 12 > Region 0: I/O ports at a000 [size=256] > Region 1: Memory at fb001000 (32-bit, non-prefetchable) [size=4K] > Capabilities: [40] Power Management version 2 > Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=55mA > PME(D0+,D1-,D2+,D3hot+,D3cold+) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Kernel modules: hisax, netjet > > When I run dahdi_genconf I get the following error: > > [root@pbx ~]# dahdi_genconf > Empty configuration -- no spans > /usr/sbin/dahdi_span_types: línea 158: cd: > /sys/bus/dahdi_devices/devices/*: No existe el fichero o el directorio > cat: /sys/bus/dahdi_devices/devices/*/location: No existe el fichero o > el directorio > cat: /sys/bus/dahdi_devices/devices/*/hardware_id: No existe el fichero > o el directorio > cat: /sys/bus/dahdi_devices/devices/*/spantype: No existe el fichero o > el directorio > Empty configuration -- no spans > /usr/sbin/dahdi_span_assignments: línea 183: cd: > /sys/bus/dahdi_devices/devices/*: No existe el fichero o el directorio > cut: /sys/bus/dahdi_devices/devices/*/spantype: No existe el fichero o > el directorio > Empty configuration -- no spans > Empty configuration -- no spans > > Which is the better way to install Asterisk NOW? I need install with AX > card inserted before?
That looks like the result of a part-finished upgrade. You probably need to rebuild DAHDI *while the card is installed in the machine*, so it can detect the hardware properly; and then after doing that, you may need to rebuild Asterisk again. -- AJS Answers come *after* questions. -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users