El 27/01/14 13:26, A J Stiles escribió:
On Monday 27 January 2014, Fernando Pizarro wrote:
Hi all!
I'm new with telephony cards and DAHDI drivers. I have installed
Asterisk NOW 3.0.0 and update to Asterisk 11.7.0, modules are update too.
I'm following the installation guide of Atcom [1] for AX1600P analogic
card, modules are loaded
[root@pbx ~]# lsmod | grep -E "hisax|netjet|dahdi"
netjet 14618 0
isdnhdlc 4523 1 netjet
mISDNipac 33989 1 netjet
mISDN_core 73118 3 netjet,mISDNipac
hisax 410162 0
isdn 119265 1 hisax
dahdi_transcode 5240 1 wctc4xxp
dahdi_voicebus 49368 2 wctdm24xxp,wcte12xp
dahdi 207790 15
xpp,dahdi_transcode,wcb4xxp,wctdm,wcfxo,wcaxx,wctdm24xxp,wcte11xp,wct1xxp,w
cte13xp,wcte12xp,dahdi_voicebus,wcte43x,wct4xxp,oct612x crc_ccitt
1369 4 isdnhdlc,hisax,wctdm24xxp,dahdi
and there is the output of lspci command:
[root@pbx ~]# lspci -vvvvvv -s 02:03.0
02:03.0 Communication controller: Tiger Jet Network Inc. Tiger3XX
Modem/ISDN interface
Subsystem: Device b300:0003
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (250ns min, 32000ns max)
Interrupt: pin A routed to IRQ 12
Region 0: I/O ports at a000 [size=256]
Region 1: Memory at fb001000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=55mA
PME(D0+,D1-,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel modules: hisax, netjet
When I run dahdi_genconf I get the following error:
[root@pbx ~]# dahdi_genconf
Empty configuration -- no spans
/usr/sbin/dahdi_span_types: línea 158: cd:
/sys/bus/dahdi_devices/devices/*: No existe el fichero o el directorio
cat: /sys/bus/dahdi_devices/devices/*/location: No existe el fichero o
el directorio
cat: /sys/bus/dahdi_devices/devices/*/hardware_id: No existe el fichero
o el directorio
cat: /sys/bus/dahdi_devices/devices/*/spantype: No existe el fichero o
el directorio
Empty configuration -- no spans
/usr/sbin/dahdi_span_assignments: línea 183: cd:
/sys/bus/dahdi_devices/devices/*: No existe el fichero o el directorio
cut: /sys/bus/dahdi_devices/devices/*/spantype: No existe el fichero o
el directorio
Empty configuration -- no spans
Empty configuration -- no spans
Which is the better way to install Asterisk NOW? I need install with AX
card inserted before?
That looks like the result of a part-finished upgrade.
You probably need to rebuild DAHDI *while the card is installed in the
machine*, so it can detect the hardware properly; and then after doing that,
you may need to rebuild Asterisk again.
Hi,
I'm going to try reinstall with card installed.
Regards.
Fernando.
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
