El 27/01/14 13:44, Fernando Pizarro escribió:
El 27/01/14 13:26, A J Stiles escribió:
On Monday 27 January 2014, Fernando Pizarro wrote:
Hi all!
I'm new with telephony cards and DAHDI drivers. I have installed
Asterisk NOW 3.0.0 and update to Asterisk 11.7.0, modules are update
too.
I'm following the installation guide of Atcom [1] for AX1600P analogic
card, modules are loaded
[root@pbx ~]# lsmod | grep -E "hisax|netjet|dahdi"
netjet 14618 0
isdnhdlc 4523 1 netjet
mISDNipac 33989 1 netjet
mISDN_core 73118 3 netjet,mISDNipac
hisax 410162 0
isdn 119265 1 hisax
dahdi_transcode 5240 1 wctc4xxp
dahdi_voicebus 49368 2 wctdm24xxp,wcte12xp
dahdi 207790 15
xpp,dahdi_transcode,wcb4xxp,wctdm,wcfxo,wcaxx,wctdm24xxp,wcte11xp,wct1xxp,w
cte13xp,wcte12xp,dahdi_voicebus,wcte43x,wct4xxp,oct612x crc_ccitt
1369 4 isdnhdlc,hisax,wctdm24xxp,dahdi
and there is the output of lspci command:
[root@pbx ~]# lspci -vvvvvv -s 02:03.0
02:03.0 Communication controller: Tiger Jet Network Inc. Tiger3XX
Modem/ISDN interface
Subsystem: Device b300:0003
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (250ns min, 32000ns max)
Interrupt: pin A routed to IRQ 12
Region 0: I/O ports at a000 [size=256]
Region 1: Memory at fb001000 (32-bit, non-prefetchable)
[size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=55mA
PME(D0+,D1-,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel modules: hisax, netjet
When I run dahdi_genconf I get the following error:
[root@pbx ~]# dahdi_genconf
Empty configuration -- no spans
/usr/sbin/dahdi_span_types: línea 158: cd:
/sys/bus/dahdi_devices/devices/*: No existe el fichero o el directorio
cat: /sys/bus/dahdi_devices/devices/*/location: No existe el fichero o
el directorio
cat: /sys/bus/dahdi_devices/devices/*/hardware_id: No existe el fichero
o el directorio
cat: /sys/bus/dahdi_devices/devices/*/spantype: No existe el fichero o
el directorio
Empty configuration -- no spans
/usr/sbin/dahdi_span_assignments: línea 183: cd:
/sys/bus/dahdi_devices/devices/*: No existe el fichero o el directorio
cut: /sys/bus/dahdi_devices/devices/*/spantype: No existe el fichero o
el directorio
Empty configuration -- no spans
Empty configuration -- no spans
Which is the better way to install Asterisk NOW? I need install with AX
card inserted before?
That looks like the result of a part-finished upgrade.
You probably need to rebuild DAHDI *while the card is installed in the
machine*, so it can detect the hardware properly; and then after doing
that,
you may need to rebuild Asterisk again.
Hi,
I'm going to try reinstall with card installed.
Regards.
Fernando.
Hi again!
I'm tried reinstall with card installed but I get the same error when I
run dahdi_genconf. I noticed the leds are on now and dahdi_scan doesn't
show anything while before it print 99.97% 99.95%... continuously.
How I can obtain more information? some command? debugging options?
Thanks a lot. Regards.
Fernando.
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
