On Wed, 2004-03-03 at 17:16, [EMAIL PROTECTED] wrote: > > > > Steven Critchfield > <[EMAIL PROTECTED]> > Sent by: > [EMAIL PROTECTED] > > 03/03/2004 04:06 PM > Please respond to > asterisk-users > > To: > [EMAIL PROTECTED] > cc: > Subject: > Re: [Asterisk-Users] > wct1xxp module and the > T100P > > > On Wed, 2004-03-03 at 17:01, [EMAIL PROTECTED] wrote: > > I'm having trouble turning up a PRI to a T100P. I've read on the > > Digium FAQ's that once the wct1xxp module is loaded correctly, the > LED > > on the T100P will flash red. I believe I've loaded the module > > correctly because both wct1xxp and zaptel are listed when I do the > > "lsmod" command. The LED on the card does not flash on and off. > Does > > anyone have any recommendations on what I could be doing wrong? > > Could be wrong or bad cable, could be incorrect configuration, could > be > no service on the line yet. > > Must provide data to get information. > -- > Steven Critchfield <[EMAIL PROTECTED]> > > > __________________________________________________________________ > > I know the PRI is good to the RJ-45 right before it goes into the > T100P; I've made calls on it with our T-Berd. So I'm sure the cable > is ok and there is service on the line. > > I haven't run Asterisk yet; shouldn't the card look "alive" once its > driver module is loaded?
Nope, What would answer the request placed on the line. BTW, please see about putting some sane configuration options in your mailer. I know Lotus is notoriously crappy when viewed by other readers, but that was really bad. -- Steven Critchfield <[EMAIL PROTECTED]> _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
