Re: [Asterisk-Users] wct1xxp module and the T100P

[<Unavailable ID>]

Use default configuration as below should work if you have PRI line.   zaptel.conf: span=1,1,0,esf,b8zs bchan=1-23 dchan=24 loadzone = us defaultzone=us     zapata.conf: [channels] context=default switchtype=national signalling=pri_cpe channel=>1-23 group = 1   If it's not green, make sure you put in right framing, coding, signalling, switchtype.   Call your telco and ask them if you do not know for sure.  It could be E&M Wink (channel bank line) which uses different settings.   Hope this help.   Tools: /sbin/ztcfg or /sbin/zttool   -Tri.   ----- Original Message ----- From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Wednesday, March 03, 2004 3:28 PM Subject: Re: [Asterisk-Users] wct1xxp module and the T100P Andrew McRory <[EMAIL PROTECTED]> Sent by: [EMAIL PROTECTED] 03/03/2004 04:11 PM Please respond to asterisk-users                 To:        [EMAIL PROTECTED]         cc:                 Subject:        Re: [Asterisk-Users] wct1xxp module and the T100P On Wed, 3 Mar 2004 [EMAIL PROTECTED] wrote: > I'm having trouble turning up a PRI to a T100P.  I've read on the Digium > FAQ's that once the wct1xxp module is loaded correctly, the LED on the > T100P will flash red.  I believe I've loaded the module correctly because > both wct1xxp and zaptel are listed when I do the "lsmod" command.  The LED > on the card does not flash on and off.  Does anyone have any > recommendations on what I could be doing wrong? Switch type, line code, framing all matter. How about posting your config? -- Andrew McRory - President/CTO Linux Systems Engineers, Inc. PO BOX 3791 Tallahassee, FL 32315 (850)224-5737 (850)294-7567 _______________________________________________________________________________ Sure: zaptel.conf: span=1,1,0,esf,b8zs bchan=1-23 dchan=24 loadzone = us defaultzone=us zapata.conf: [channels] context=cyperpri switchtype=national pridialplan=unknown signalling=pri_cpe channel=>1-23 Here's a question, though: does the wct1xxp module read from either zaptel.conf or zapata.conf when loaded? Thanks! chris