Hi,
On 09/13/2016 06:51 AM, Ikka Tirtawidjaja wrote:
Hi,
Is there anyone here who has experience connecting Asterisk (ver 13.8)
with PBX Panasonic KX-TDA600 ?
The architecture more less like this :
Telco Sip Trunk ---> Asterisk 13 ---> Panasonic KX-TDA600 ---> Phone / Fax
What connectivity do you currently use for the KX-TDA600? E1, T1, POTS,
BRI?
Others have suggested a SIP to E1/T1 gateway, which would let you skip
the asterisk box, if you don't have other uses for it.
Another option is to use a PCI-E E1/T1 interface card in the asterisk
box, especially if you already have an E1 or T1 interface in the
KX-TDA600. I personally don't like buying smaller then a dual T1/E1
card, as the price difference between a dual and a single is so small.
If the KX-TDA600 is set-up for Analog/POTS, you can use a channel bank
on the second T1/E1 port, and feed POTS into the KX-TDA600.
For a small installation that wanted to keep their Nortel Key System,
and their Telco really wanted to provide a PRI instead of POTS (the
Nortel could only take pots), we used a dual T1 PCI card in an asterisk
box, ran PRI on the Telco interface, an ADIT 600 channel bank on the
second interface, and handed 4 POTS lines to the Nortel Key System.
The key is to give your self the most flexibility to change later, and
preserve your existing investment.
-Harry
Thanks in advance,
Regards,
Ikka - Jakarta, Indonesia
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016
http://www.asterisk.org/community/astricon-user-conference
New to Asterisk? Start here:
https://wiki.asterisk.org/wiki/display/AST/Getting+Started
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users